Holemaker
SP16004 Annular Cutter Pilot Pin 6.34mm x 102mm — Suits 50Mm Depth Cutters
Part No: SP16004 | Barcode: 9328042002563 | Product Group: Mag Drill Pilot Pins
Holemaker SP16004 pilot pin for annular cutters, 6.34mm diameter x 102mm length. Designed for 50mm depth cutters. Ejects the slug, provides coolant feed, and locates the centre of the cut.
6.34mm Diameter
102mm Length
Suits 50Mm Depth Cutters
Slug Ejection
Coolant Feed
Key Features & Benefits
- Precision Ground 6.34mm Diameter — ensures accurate centre location for clean, round holes every time.
- Slug Ejection — automatically pushes the cut slug out of the cutter as drilling completes, preventing jams and downtime.
- Coolant Feed Channel — delivers cutting fluid directly to the cutting zone through the centre of the pilot pin for improved tool life.
- Sized for 50Mm Depth Cutters — 102mm length is matched specifically to 50mm depth annular cutters in the Holemaker Gold Series range.
When to Use This Pilot Pin
The SP16004 pilot pin is an essential consumable for magnetic base drilling with annular cutters. Use this pin with all Holemaker Gold Series 50mm depth cutters (AT1250 through AT4050). Replace the pilot pin when it shows visible wear, bending, or if the cutter begins to wander during cutting.
Pro Tip: Keep spare pilot pins on hand — they are a consumable item that wears with use. A worn pilot pin causes inaccurate hole placement and can damage your annular cutter. Check the pin before each drilling session.
Authorised Australian Dealer — This product is sourced directly from Holemaker Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Diameter | Length | Suits | Barcode |
|---|---|---|---|---|
| SP16003 | 6.34mm | 77mm | 25Mm Depth Cutters | 9328042002556 |
| SP16004 ★ | 6.34mm | 102mm | 50Mm Depth Cutters | 9328042002563 |
★ You are viewing the highlighted variant. Other sizes are also available.
Reviews
There are no reviews yet.