Description
Milwaukee M12BRAID-0 — m right angle impact driver available at Alltools Geelong. Shop our full m right angle impact driver range in Geelong.
Milwaukee
M12 1/4″ Right Angle Impact Driver — 68 Nm, 35.6 mm Head
Part No: M12BRAID-0 | Barcode: 4002395167715
Milwaukee’s M12BRAID-0 is a compact right angle impact driver with a 35.6 mm head diameter that fits where inline drivers cannot. It delivers 68 Nm of torque and 3,300 IPM through a full metal gearbox, making it a genuine fastening tool rather than just an access-only driver.
68 Nm Torque
3,300 IPM
2,425 RPM
35.6 mm Head
287 mm Length
1.0 kg
12V M12 Platform
Suitable For
Tight-Access Framing
Switchboard Work
Joist Bays
HVAC Ductwork
Plumbing Brackets
Cabinetry
Key Features & Benefits
- 35.6 mm Head Diameter — one of the slimmest right angle heads available, fitting between 45 mm stud centres and behind mounted switchboard rails.
- 68 Nm Fastening Torque — enough to drive 14-10 × 65 mm screws into framing timber without pre-drilling, not just light-duty access work.
- Full Metal Gearbox and Gears — built for sustained site use where plastic planetary gears would strip under repeated impact loading.
- Multi-Handle Design — provides multiple hand positions for comfort and control in overhead, vertical, and horizontal orientations.
- On-Board Fuel Gauge — shows remaining battery charge at a glance so you can plan battery swaps before running out mid-task.
- REDLINK PLUS Intelligence — protects the tool and battery from overload, overheating, and over-discharge during extended use.
When to Use This Right Angle Driver
The M12BRAID-0 solves the problem of fastening in spaces too tight for a standard impact driver. Electricians use it behind switchboards and in ceiling cavities, plumbers reach pipe brackets between joists, and HVAC installers secure ductwork flanges in confined ceiling spaces. At 68 Nm it handles genuine fastening tasks — not just the light access work that smaller right angle drivers are limited to. Keep this alongside your M18 impact driver for the 10–15% of fasteners that need right angle access.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 12V |
| Max Torque | 68 Nm |
| No-Load Speed | 0–2,425 RPM |
| Impacts Per Minute | 0–3,300 |
| Drive | 1/4″ Hex |
| Head Diameter | 35.6 mm |
| Overall Length | 287 mm |
| Weight (bare) | 1.0 kg |
| Motor | Brushless |
| Battery Platform | M12 REDLITHIUM |
| Warranty | 5 Years |
Reviews
There are no reviews yet.