Description
Rennsteig 366250C — rennsteig slitting chisel 33mm available at Alltools Geelong. Shop our full rennsteig slitting chisel 33mm range in Geelong.
Rennsteig
Rennsteig Electrician’s Slitting Chisel — 33 x 250mm
Part No: 366250C | Barcode: 4049002001703 | Product Group: Cold Chisels
The Rennsteig 366250C is an electrician’s slitting chisel with two parallel cutting edges on a 33mm-wide, 250mm body. German-made from hardened tool steel, it cuts a clean, uninterrupted cable channel in masonry in a single run.
Twin Cutting Edges
33mm Wide
250mm Long
For Cable Channels
Hardened Tool Steel
Made in Germany
Suitable For
Brick & Masonry
Chasing Cable Channels
Conduit & Wiring Runs
Electrical Rough-In
Key Features & Benefits
- Two cutting edges — the twin parallel edges score both sides of the channel at once, so you slit a clean cable chase in one continuous pass.
- Purpose-built for electricians — sized to cut conduit and wiring channels into brick and masonry walls during rough-in.
- Hardened throughout — through-hardened high-alloy tool steel transfers the full hammer blow and resharpens repeatedly.
- Safety impact head — the treated struck end resists mushrooming and splintering under sustained hammering.
- German build quality — GS-approved and made to DIN standards for dependable on-site performance.
When to Use This Tool
Use the 366250C to chase cable channels into brick and masonry walls when roughing in wiring and conduit. The twin 33mm edges cut both sides of the slot together for a fast, even channel. A go-to tool for electricians and maintenance trades; drive it with a club hammer.
| Part No. | Type | Edge Width | Length | Barcode |
|---|---|---|---|---|
| 310125C | Flat Cold | 18mm | 125mm | 4049002062087 |
| 310150C | Flat Cold | 18mm | 150mm | 4049002029608 |
| 310175C | Flat Cold | 21mm | 175mm | 4049002029622 |
| 310200C | Flat Cold | 24mm | 200mm | 4049002029646 |
| 310250C | Flat Cold | 25mm | 250mm | 4049002029660 |
| 310300C | Flat Cold | 26mm | 300mm | 4049002029684 |
| 380240C | Slitting | 26mm | 240mm | 4049002030321 |
| 366250C ★ | Slitting (Electrician’s) | 33mm | 250mm | 4049002001703 |
| 385060C | Jointing | 60mm | 250mm | 4049002030369 |
| 385070C | Jointing | 70mm | 250mm | 4049002068966 |
| RCC3 | Flat Cold Set (3pc) | 18/24/25mm | 150/200/250mm | 9300784025567 |
★ You are viewing the highlighted variant. Other sizes/variants in this series are also available.
Browse our full range of punches & cold chisels at Alltools Geelong.
Reviews
There are no reviews yet.