Description
Kincrome K9484 — starter punch 5mm available at Alltools Geelong. Shop our full starter punch 5mm range in Geelong.
Kincrome
Kincrome Starter Punch — 5mm
Part No: K9484 | Barcode: 9312753096416 | Brand: Kincrome
The Kincrome K9484 is a 5mm starter punch in hardened and tempered Chrome Vanadium steel. A shorter, stouter taper punch, it aligns holes and breaks stubborn pins and fasteners free before a pin punch finishes the job.
Chrome Vanadium Steel
5mm Tip
Short Taper
Knurled Grip
Precision Machined
Key Features & Benefits
- Short, stout taper profile — a shorter version of a taper punch that starts a stubborn pin or fastener moving without bending.
- Hardened & tempered Chrome Vanadium steel (Cr-V) — tough but not brittle for heavy hammer blows.
- Knurled finish — maximises grip and avoids movement while the punch is being struck.
- Precision machined — aligns holes prior to fitting a fastener or rivet.
When to Use This Starter Punch
Reach for the K9484 5mm starter punch to align holes prior to fitting a fastener, or to start a tight pin or rivet moving where its shorter length resists bending better than a long taper punch. Follow up with a matching pin punch to drive the pin clear.
Pro Tip: Use the starter (taper) punch only to break the pin free and get it moving — then swap to a parallel pin punch of the same size to drive it out the rest of the way without enlarging the bore.
Authorised Australian Dealer — This product is sourced directly from Kincrome Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Tip Size | Overall Length |
|---|---|---|
| K9482 | 2mm | 120mm |
| K9483 | 3mm | 120mm |
| K9484 ★ | 5mm | 120mm |
| K9485 | 6mm | 120mm |
| K9486 | 8mm | 120mm |
| K9487 | 10mm | 120mm |
| K9489 | Set — 6 Piece (2-10mm) | — |
★ You are viewing the highlighted variant. Other sizes/variants in this series are also available.
Browse our full range of punches & cold chisels at Alltools Geelong.
Reviews
There are no reviews yet.