Description
Sutton Tools
Sutton Screw Extractor No.5 — Spiral Flute
Part No: M6010005 | Barcode: 9311963009148 | Series: Sutton Screw Extractor
The Sutton No.5 spiral-flute screw extractor removes broken, seized or thread-stripped studs, bolts and screws cleanly. The reverse (left-hand) spiral flutes bite harder as you turn anticlockwise, gripping the broken fastener and backing it out — sized to suit 5/8″ (16mm) fasteners.
Size No.5
Spiral Flute
Left-Hand Grip
Hardened Steel
Suits 5/8″ (16mm)
Suitable For
Broken Bolts & Studs
Thread-Stripped Screws
Seized & Rusted Fasteners
Automotive & Engineering
Key Features & Benefits
- Reverse spiral flutes — the deep left-hand flutes wedge into the pilot hole and tighten their grip as you turn anticlockwise, so the extractor and the broken fastener back out together.
- Hardened tool steel — holds its bite in hard, rusted and snapped fasteners without rounding off.
- Sized No.5 for 5/8″ (16mm) — matched to a specific fastener range so the flutes engage cleanly without splitting the work.
- Works with a tap wrench or spanner — the square drive end lets you apply controlled, steady torque.
- Australian-made Sutton quality — trusted by trades and engineers for hard-wearing tooling.
When to Use This Extractor
Reach for the No.5 (M6010005) when a bolt or screw has snapped off or stripped and you need to get the remains out without damaging the surrounding thread. Centre-punch and drill a pilot hole down the broken fastener, drive the extractor in, then back it out anticlockwise. Choose the size from the table below to match the broken fastener diameter.
Pro Tip: Drill the pilot hole dead-centre and only as deep as the spec chart calls for — an off-centre or oversized hole thins one wall of the broken fastener and lets the extractor spin. A drop of penetrating oil left to soak first makes seized studs back out far easier.
Authorised Australian Dealer — This product is sourced from Sutton Tools and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Size | Removes Broken Fastener | Barcode |
|---|---|---|---|
| M6010001 | No.1 | 3/16″–5/16″ (5–8mm) | 9311963005737 |
| M6000002 | No.2 | 3/8″ (10mm) | 93829670 |
| M6000003 | No.3 | 7/16″ (11mm) | 93829687 |
| M6010004 | No.4 | 1/2″–9/16″ (12–14mm) | 10263 |
| M6010005 ★ | No.5 | 5/8″ (16mm) | 9311963009148 |
| M6010006 | No.6 | 3/4″ (20mm) | 9311963072227 |
| M6010007 | No.7 | 7/8″ (22mm) | 9311963072234 |
| M6010008 | No.8 | 1″ (25mm) | 9311963072241 |
| M6010009 | No.9 | 1-1/8″ (28mm) | 9311963072258 |
★ You are viewing the highlighted size. Other sizes in the Sutton range are also available.
Browse our full range of screw & bolt extractors at Alltools Geelong.
Reviews
There are no reviews yet.