PK Tool
Pipe & Tube Bender — 260mm, 6/8/10mm (1/4", 5/16", 3/8")
Part No: PT51902 | Barcode: 9313743715218
The PKTool PT51902 is a 260mm manual tube bender that shapes 6mm, 8mm and 10mm soft metal tubing through 0–180° without kinking, crushing or breaking. Etched angle calibration scales on both left, right and offset bends ensure accurate, repeatable bends for brake lines, gas lines and refrigeration tubing.
6, 8 & 10mm Sizes
260mm Length
0–180° Bending
Kink-Free
Angle Calibration
Suitable For
Brake Tubing
Water Lines
Gas Lines
Refrigeration Tubing
Aluminium Tube
Copper Tube
Thin-Wall Steel
Key Features & Benefits
- Three-in-one: 6mm, 8mm and 10mm — one tool handles the three most common small-bore tubing diameters used in brake, gas and refrigeration applications without needing separate benders.
- Kink-free bending — the mandrel and guide groove support the tube wall throughout the bend radius, preventing the flattening and kinking that occurs when bending by hand or over a round object.
- 0 to 180° range — from gentle sweeping bends to tight U-bends for routing tubing around obstructions.
- Etched calibration scales — left, right and offset bend scales allow accurate bend angles without a protractor or trial-and-error fitting.
- Suits wall thickness up to 0.4mm — handles both standard-wall and thin-wall tubing within the supported diameters.
- Ergonomic single-hand design — can be operated with one hand while the other steadies the tube, important when forming bends close to existing fittings.
When to Use This Bender
Use the PT51902 when fabricating or repairing brake hard lines, fuel lines, power steering lines, refrigeration pipe runs and gas line connections where precision bends are needed. The 6mm size is the most common brake line diameter on passenger vehicles; 8mm and 10mm suit larger brake circuits, refrigeration and gas applications. A must-have for anyone fabricating custom brake lines or doing full brake line replacement.
Authorised Australian Dealer — This product is sourced directly from PK Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Tube Sizes | Overall Length | Bend Range | Max Wall Thickness |
|---|---|---|---|---|
| PT51902 ★ | 6mm, 8mm, 10mm | 260mm | 0–180° | 0.4mm |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.