Description
Carbitool
Carbitool T2614 Solid Carbide Laminate Flush & Bevel Router Bit — 1/4″ Shank
Part No: T2614 | Barcode: 9314350004283
Carbitool T2614 is a 1-flute solid carbide router bit for trimming plastic laminate flush and cutting a clean 7° bevel on the edge in a single pass. Designed for handheld laminate trimmers and compact routers with a 1/4″ collet, the solid carbide tip holds a keen edge through abrasive laminate face materials and glue-lines.
1 Flute
Solid Carbide
Shank 1/4″ (6.35mm)
Cutter Ø 1/4″ (6.35mm)
Cut Length 3/8″ (9.53mm)
Made in Australia
Suitable For
Plastic Laminate
Melamine & MDF
Veneered Panels
Hardwood Trim
Key Features & Benefits
- Dual-function geometry — trims the laminate flush to the substrate and leaves a 7° bevel on the top edge in one operation, eliminating a separate bevelling pass.
- Solid carbide construction — tougher and more wear-resistant than brazed-tip bits; holds sharpness through the silica-rich resin in high-pressure laminates.
- Compact head profile — small cutter diameter lets you trim tight corners and internal cutouts that larger flush-trim bits cannot reach.
- 1/4″ shank — fits standard laminate trimmers (Makita RT, DeWalt DCW600, Bosch GKF) and any 1/4″ collet router.
- Can be used for 0° square trim — tilt the base flat for a straight flush cut without bevel when the job calls for a square finish.
- Australian-made — precision ground by Carbitool in Victoria to tight concentricity tolerances.
Common Applications
The T2614 is the go-to bit for post-formed and flat-laid plastic laminate benchtops, vanity tops, and joinery facings. Run the laminate trimmer with the base flat on the substrate for a 7° bevel that softens the top edge and prevents chipping in service. Lift the base slightly for a cleaner, more pronounced bevel. For a square flush trim, use with the base tilted to bring the square shoulder of the cutter into contact.
Authorised Australian Dealer — This product is sourced directly from Carbitool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Manufacturer Part | T2614 |
| Construction | Solid Carbide |
| Flutes | 1 |
| Shank Diameter | 1/4″ (6.35mm) |
| Cutter Diameter | 1/4″ (6.35mm) |
| Cut Length | 3/8″ (9.53mm) |
| Overall Length | 1-1/2″ (38.10mm) |
| Cutting Action | 7° bevel or 0° square cut |
| Made In | Australia |
Reviews
There are no reviews yet.