Description
Hafco A366 — hydraulic panel beating kit 10 available at Alltools Geelong.
Hafco
Hydraulic Panel Beating Kit — 10 Tonne, 14-Piece, PBK-10H
Part No: A366 | Model: PBK-10H | Barcode: A366
The Hafco PBK-10H 14-piece hydraulic panel beating kit provides 10 tonnes of force through a 130mm stroke ram for straightening and reshaping automotive frames and body panels. The 2-stage pump transitions between fast and slow operation, and the comprehensive attachment set covers bending, spreading, pushing and wedging applications.
10 Tonne Ram
14 Pieces
130mm Stroke
2-Stage Pump
0.5T Spreader Ram
Wheeled Case
Suitable For
Body Panel Straightening
Frame Rail Repair
Chassis Spreading
Panel Bending
Collision Repair
Key Features & Benefits
- 10-tonne main ram — delivers enough hydraulic force to straighten heavily deformed structural body panels and chassis sections.
- 130mm stroke, 322–452mm range — the extended stroke covers a wide working range when combined with the included extension tubes (110, 265, 365, 520mm).
- 2-stage fast/slow pump — fast stage extends the ram quickly; slow stage applies precise force for controlled straightening work without over-correction.
- 0.5-tonne spreader ram — easily swapped in for spreading and separation tasks where the 10T ram would apply too much force.
- 160 x 90mm base plate — provides stable footing when the ram is working in compression against a floor, bench or structural member.
- Full attachment set — round rubber head, round head, square head, tapered wedge head, cylinder toe and extension toe cover virtually all panel straightening and spreading scenarios.
- Wheeled carry case — 32kg kit rolls easily between job sites with all components organised and protected.
When to Use This Kit
The PBK-10H is suited to tradesmen, panel beaters, mechanics and well-equipped workshops tackling moderate-to-heavy collision damage where dents and deformation cannot be corrected by hand or with slide hammer methods. It is also valuable for chassis spreading during body-off restoration work and for apprentices learning hydraulic panel repair technique. Combine with the RG1700 hand hammer and dolly set for a complete panel repair capability.
Authorised Australian Dealer — This product is sourced directly from PK Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Model | Ram Force | Stroke | Range | Pieces | Weight |
|---|---|---|---|---|---|---|
| A366 ★ | PBK-10H | 10 Tonne | 130mm | 322–452mm | 14 | 32kg |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.