Description
Festool 205551 — wood universal saw blade hw available at Alltools Geelong.
Festool
Wood Universal Saw Blade HW 160×1.8×20 W28
Part No: 205551 | Barcode: 4014549377062
The Festool 205551 thin kerf universal blade is the all-rounder for the TS 55 F, TSC 55 K, HK 55 and HKC 55 saws. The 28 alternating teeth handle both rip and cross cuts in solid wood and wood-based sheet materials with a practical balance of speed and finish quality.
160mm Diameter
1.8mm Thin Kerf
20mm Bore
28T W (Alternating)
Fine Grain Carbide
Compatible Saws
TS 55 F Plunge Saw
TSC 55 K Cordless Plunge Saw
HK 55 Circular Saw
HKC 55 Cordless Circular Saw
Key Features & Benefits
- Fine grain carbide tips — premium tungsten carbide maintains sharpness longer for consistent cutting performance in solid wood and wood-based materials.
- 1.8mm thin kerf — narrower cut width requires less motor effort, produces less waste and is the correct kerf for the TS 55 F, TSC 55 K, HK 55 and HKC 55 saws. Not compatible with older TS 55 / TS 55 R saws which use 2.2mm kerf blades.
- W (Alternating) tooth geometry — optimised cutting geometry for clean, controlled cuts with minimal tear-out in the target material.
- Colour-coded identification — each blade in the thin kerf range has a colour-coded label for quick identification of the correct blade for the job.
- Precision-tensioned body — the blade plate is tensioned for reduced vibration and noise, producing smoother cuts and extending blade life.
When to Use This Blade
Choose the 205551 W28 as your everyday go-to blade when you need one blade for both rip and cross cuts. It strikes the best balance between cutting speed and surface finish in the thin kerf range. For faster rip cutting, drop to the 205550 W12. For finer cross-cuts on veneered panels, step up to the 205553 W42.
Authorised Australian Dealer — This product is sourced directly from Festool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Teeth | Tooth Shape | Application |
|---|---|---|---|
| 205550 | 12 | W | Wood Rip Cut — Fast rip cuts in solid wood |
| 500458 | 18 | W | Wood Standard — Fast cuts in wood and chipboard |
| 205551 ★ | 28 | W | Wood Universal — All-round wood cutting |
| 205553 | 42 | WD | Wood Fine Cut — Clean cross cuts, veneered panels |
| 205554 | 52 | TF | Laminate/HPL — Corian, melamine, mineral materials |
| 205555 | 52 | TF | Aluminium/Plastics — Non-ferrous metals, hard plastics |
★ You are viewing the highlighted variant. Other blades in this series are also available. Note: These 1.8mm thin kerf blades are for the TS 55 F / TSC 55 K / HK 55 / HKC 55 only. Older TS 55 / TS 55 R saws use 2.2mm kerf blades.
Reviews
There are no reviews yet.