Milwaukee
M18FSGC-0 FUEL Drywall Screw Gun With Collated Attachment — 18V Brushless
Part No: M18FSGC-0 | Barcode: 4892210150479
The Milwaukee M18FSGC-0 is an 18V FUEL brushless drywall screw gun with a removable collated magazine attachment. The POWERSTATE motor delivers 4,500 RPM and auto-start technology engages the motor only on contact with the material, maximising runtime and reducing noise between fasteners.
18V M18 FUEL Platform
Brushless POWERSTATE Motor
4,500 RPM
13 Nm Torque
Auto-Start Technology
64 Sheets Per Charge
Removable Collated Attachment
Tool Only — Skin
Suitable Applications
Plasterboard / Drywall
Ceiling Sheets
Wall Sheeting
Timber Framing
Steel Framing
Key Features & Benefits
- POWERSTATE brushless motor at 4,500 RPM — delivers faster screw driving than corded alternatives, with up to 10x longer motor life.
- Auto-start technology — the motor only spins when the nose contacts the drywall, reducing battery drain and jobsite noise between screws.
- REDLINK PLUS Intelligence — provides overload protection and optimised power delivery to extend tool and battery life.
- Removable collated magazine attachment — remove the magazine to use as a standalone screwdriver for single-screw applications and detail work.
- Fine-adjustment nose cone — dial in precise countersink depth for flush, consistent screw seating across entire sheets.
- Up to 64 sheets per charge — on a single M18 REDLITHIUM 5.0 Ah battery, enough for a full day of sheeting without recharging.
- Accepts 25–55 mm collated screws — compatible with the CA55 collated attachment for standard plasterboard and ceiling screw lengths.
- 1/4 in hex quick-release chuck — fast, tool-free bit changes with included PH2 and extended PH2 bits.
When to Use This Screw Gun
Choose the M18FSGC-0 when you are hanging plasterboard, ceiling sheets or wall sheeting and need cordless freedom with corded-level speed. The auto-start motor and collated magazine make it the fastest way to fix sheets to timber or steel framing. Remove the collated attachment and it doubles as a standalone screwdriver for finishing, patching and detail fastening. Ideal for plasterers, drywall installers and fit-out crews.
Pro Tip: Set the nose cone depth adjustment before starting each sheet type — plasterboard requires a slightly countersunk finish without breaking the paper face. Use the lock-on mode for continuous overhead ceiling work to reduce trigger fatigue.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Voltage | Motor | Speed (RPM) | Torque | Screw Range | Length (with attachment) | Weight (bare) | Barcode |
|---|---|---|---|---|---|---|---|---|
| M18FSGC-0 ★ | 18V | Brushless | 0–4,500 | 13 Nm | 25–55 mm | 407 mm | 1.7 kg | 4892210150479 |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.