Makita
DFR450ZX 18V Autofeed Screwdriver — Collated Drywall Screw Gun
Part No: DFR450ZX | Barcode: 4711585181676
The Makita DFR450ZX is an 18V cordless autofeed screwdriver purpose-built for high-volume collated drywall screw driving. Its 4-pole motor with dual steel bearings delivers 4,000 RPM for fast, consistent fastening across plasterboard and timber framing applications.
18V LXT
4,000 RPM
4mm × 25–41mm Screws
1/4″ Hex Shank
1.6 kg (Skin)
Tool-Less Depth Adjust
Suitable Applications
Plasterboard
Drywall
Timber Framing
Ceiling Installation
Wall Sheeting
Key Features & Benefits
- 4-pole motor with dual steel bearings — delivers consistent high torque and extended motor life under heavy production workloads.
- 4,000 RPM no-load speed — drives collated drywall screws rapidly, keeping pace with professional plasterboard installation rates.
- High-durability silent clutch — direct drive transmission in reverse rotation reduces wear and provides smooth, reliable engagement.
- Tool-less stopper base adjustment — quickly set screw depth without tools, reducing downtime between different substrates or screw lengths.
- Collated screw capacity: 4mm × 25–41mm — handles the most common drywall screw sizes for plasterboard to timber and steel stud framing.
- Reversing switch — allows easy removal of mis-driven screws without changing tools.
- Compact 355mm length at 1.6 kg (skin) — lightweight enough for extended overhead ceiling work without operator fatigue.
When to Use This Screwdriver
Choose the DFR450ZX for production-rate plasterboard and drywall installation where collated screw strips eliminate the need to handle individual fasteners. This tool is ideal for plasterers, ceiling fixers, and fit-out contractors who drive hundreds of screws per shift. The autofeed mechanism accepts standard collated drywall screws from 25mm to 41mm, covering single and double-layer plasterboard to timber or steel stud framing. As a skin-only tool, pair it with your existing Makita 18V LXT batteries.
Pro Tip: Use 25mm screws for single-layer 10mm plasterboard to timber studs, and 41mm screws for double-layer or 13mm board. Set the depth stop so the screw head sits just below the paper face without breaking through — this ensures clean mud finishing.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Voltage | Speed (RPM) | Drive Shank | Screw Capacity | Length (mm) | Weight (kg) | Barcode |
|---|---|---|---|---|---|---|---|
| DFR450ZX ★ | 18V | 4,000 | 6.35mm (1/4″ Hex) | 4mm × 25–41mm | 355 | 1.6 | 4711585181676 |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.