Milwaukee
M18FR120B M18 FUEL 1/2″ Plunge Router
Part No: M18FR120B | Barcode: 4892210229687
M18 FUEL brushless 1/2″ plunge router delivering 2.25 peak horsepower with variable speed from 10,000 to 25,000 RPM. Includes both 1/2″ and 1/4″ collets, plunge base with 63mm travel, and 6-step depth turret for fast, accurate depth changes. Over 225 linear feet of routing per charge.
M18 FUEL
2.25 HP Peak
10,000–25,000 RPM
1/2″ & 1/4″ Collets
63mm Plunge
3.6 kg
Suitable For
Edge Profiling
Dado & Rabbet Cuts
Template Routing
Mortising
Plunge Cutting
Key Features & Benefits
- 2.25 peak horsepower — matches mid-range corded routers, handling large 1/2″ shank bits in hardwood without bogging down.
- 1/2″ and 1/4″ collets included — accepts the full range of router bits from small trimming bits to large panel-raising and stile-and-rail cutters.
- Plunge base with 63mm travel — deep plunge capacity for through-mortises, deep dados, and multi-pass plunge cutting in thick stock.
- 6-step depth turret — pre-set six depth stops at 1/8″ increments for rapid depth changes when stepping down through multi-pass cuts.
- Micro-adjust depth at 1/64″ increments — fine-tune the final depth for precise joinery and inlay work where fractions of a millimetre matter.
- 225+ linear feet per charge — enough runtime for extended edge profiling and template work across multiple workpieces.
When to Use This Router
The M18FR120B is Milwaukee’s full-size cordless router for serious woodworking that demands 1/2″ shank bits and sustained power through hardwoods. Choose this over the compact M18FTR-0 trimmer when using large profile bits, cutting deep dados, or routing mortises where the 2.25 HP and 63mm plunge depth are needed. The 1/2″ collet handles the larger bits that a 1/4″ trimmer cannot safely run. At 3.6 kg it is heavier than a trimmer but still lighter than most corded equivalents.
Authorised Australian Dealer — This product is backed by full Australian manufacturer warranty from Milwaukee Tool Australia, with local support and service.
Product Specifications
| Part No. | Brand | Speed Range | Collet | Plunge Cap. | Power | Weight |
|---|---|---|---|---|---|---|
| DRT50Z | Makita | 10,000–30,000 RPM | 6mm / 8mm | 40mm | — | 2.1 kg |
| M18FTR-0 | Milwaukee | 10,000–31,000 RPM | 6mm / 1/4″ | 50mm | 1.25 HP | 1.8 kg |
| M18FR120B ★ | Milwaukee | 10,000–25,000 RPM | 1/2″ & 1/4″ | 63mm | 2.25 HP | 3.6 kg |
★ You are viewing the highlighted variant. Other models in this series are also available.
Reviews
There are no reviews yet.