Intech Tools
Intech Wing Compass — 200mm (8″)
Part No: PRWC08 | Barcode: 9333608005339 | Series: Intech Layout & Marking Tools
Intech’s PRWC08 wing compass is a precision scribing and circle-marking tool with hardened divider points and a locking wing arm. Lock the wing at the required radius and scribe circles, arcs or parallel layout lines on steel, aluminium or timber with repeatable accuracy.
200mm (8″) Reach
Fabricated Steel
Locking Wing Arm
Hardened Divider Points
Spring Joint
Compatible Work
Steel & Alloys
Aluminium
Timber
Sheet Metal
Fabrication Layout
Key Features & Benefits
- Locking wing arm — the wing clamps through a slot in the leg and locks the set radius under thumbscrew pressure, preventing the setting from drifting as you swing the arc.
- Hardened divider points — both legs carry precision points that scribe a clean line on steel, alloy or timber and resist wear through repeated use.
- Large fulcrum bearing — the spring-joint design with wide bearing surface prevents sideways leg deflection when you swing wide arcs.
- Fabricated-steel construction — rigid, long-lasting and holds alignment over years of workshop use.
- Precision arcs & circles — dedicated to circle layout where a standard spring divider can slip; essential for bolt-circle marking, plasma-cut templates and large-diameter scribing.
When to Use the PRWC08
Reach for the PRWC08 when you need to scribe a circle or arc with a locked radius — bolt-circle layout on flanges, oxy/plasma-cut templates on plate, or marking concentric features on fabrication work. A standard spring divider can slip; the wing compass locks positively so the radius stays true across a full 360° swing.
Pro Tip: Before scribing a full circle on steel plate, make a small witness mark at the radius first by pressing just one point and rotating — if the point walks or the setting shifts, tighten the wing lock before committing to the full circle. This quick check saves re-layout on expensive plate stock.
Reviews
There are no reviews yet.