Description
BAR Group
1/4″ Thermoplastic Pressure Washer Hose — Black, 3,270 PSI, 10 m
Part No: 125 85.225.230 | Barcode: 9346472001321
Domestic-grade replacement pressure-washer hose in black thermoplastic — 1/4″ bore, 10 metres, single-wire reinforced and fitted with M22 × 14 mm screw-coupling ends. Direct fit on most 1,500–3,270 PSI domestic petrol and electric pressure cleaners.
10 m Length
3,270 PSI
1/4″ Bore
60 °C Max
M22 x 14 mm Ends
Single-Wire Reinforcement
Key Features & Benefits
- M22 x 14 mm screw-coupling ends — Industry-standard M22 fittings — drops straight onto Karcher-style, BAR domestic, AR Blue Clean and most rebadged 1.5–3.2k domestic units.
- Single-wire reinforced — Steel braid reinforcement under the thermoplastic skin — non-marking on garage floors but rated for genuine domestic working pressure.
- 3,270 PSI rated — Sized for the typical 2,000–3,000 PSI domestic petrol cleaner with margin for unloader spikes and brief peak duty.
- 60 °C cold-water service — Cold-water rated only — for hot-water hoses use the R1 hot-water hose range with 121 °C+ rating.
- Lightweight thermoplastic skin — Flexible, kink-resistant cover, much easier to spool than rubber R1 hose on light domestic units.
When to Use
Order part number 125 85.225.230 when the OEM hose on a 2,000–3,200 PSI domestic petrol or electric pressure washer has split or weeping fittings. Confirm M22 × 14 mm threads at both gun and pump before ordering.
Authorised Australian Dealer — This product is sourced directly from BAR Group Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Length | Working Pressure | Max Temp | Ends |
|---|---|---|---|---|
| 125 85.225.230 ★ | 10 m | 3,270 PSI | 60 °C | M22 x 14 mm |
★ You are viewing the highlighted variant. Other sizes/variants in this series are also available.
Browse our full range of pressure washer hoses at Alltools Geelong.
Reviews
There are no reviews yet.