Description
BAR Group
15 m Pressure Washer Hose — R1 3/8″, 4,000 PSI, QC Ends
Part No: 165 R1J400.15ML.QC | Barcode: 9346472002243
15-metre commercial pressure-washer hose with factory-fitted 3/8″ QC ends. Single-wire R1 Lenflex construction, 4,000 PSI working, 150 °C hot-water rated — drop-in replacement on any BAR-spec petrol or electric machine with QC fittings.
15 m Length
4,000 PSI
3/8″ Single-Wire R1
150 °C Max
QC Coupler + 3/8″ Plug
Lenflex Construction
Key Features & Benefits
- 15-metre middle length — Most-popular reach — covers a 4WD or van without coiling drag, easier to spool than 30 m hoses on smaller machines.
- Pre-fitted 3/8″ QC ends — Quick-connect plug and coupler from new — clip on the pump and gun, no spanners or thread tape required.
- 4,000 PSI rated working pressure — Single-wire R1 reinforcement, 4× safety factor, 16,000 PSI burst rating — daily commercial duty.
- 150 °C hot-water capable — Holds up on hot-water cleaning circuits without softening, weeping or ballooning under temperature cycles.
- Smooth grey non-marking cover — Won’t leave rubber streaks on epoxy floors or hospitality wash bays.
When to Use
Specify part number 165 R1J400.15ML.QC as the standard replacement length on most 4,000 PSI BAR-pattern commercial petrol and electric pressure cleaners. Pairs with the BAR Vega Tuff gun and Long Wand range.
Authorised Australian Dealer — This product is sourced directly from BAR Group Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Length | Working Pressure | Max Temp | Ends |
|---|---|---|---|---|
| 165 R1J400 10MG QC | 10 m | 4,000 PSI | 150 °C | 3/8″ QC |
| 165 R1J400.15ML.QC ★ | 15 m | 4,000 PSI | 150 °C | 3/8″ QC |
| 165 R1J400.30ML.QC | 30 m | 4,000 PSI | 150 °C | 3/8″ QC |
★ You are viewing the highlighted variant. Other sizes/variants in this series are also available.
Browse our full range of pressure washer hoses at Alltools Geelong.
Reviews
There are no reviews yet.