Description
Sutton E1001200 — e1001200 end mill available at Alltools Geelong. Shop our full e1001200 end mill range in Geelong.
Sutton
Sutton Tools E1001200 2-Flute Slot Drill / End Mill — 12mm, HSS
Part No: E1001200 | Barcode: 9311963194691
The Sutton Tools E1001200 is a 12mm two-flute HSS slot drill / end mill. Australian-made, the centre-cutting two-flute geometry clears chips freely for slotting, keyways and plunge cuts.
12mm Cutting Dia
2 Flutes
HSS
Centre-Cutting
Australian Made
Suitable For
Steel
Cast Iron
Non-Ferrous Metals
Key Features & Benefits
- 2-flute design — wide flutes clear chips efficiently in deep slots and pockets.
- Centre-cutting — plunges straight into the workpiece like a drill for slots and keyways.
- Australian made by Sutton Tools — reliable quality and consistent cutting performance.
- Ground HSS — a tough, resharpenable high-speed steel body for general workshop milling.
When to Use This Tool
Use the E1001200 for cutting slots, keyways and pockets and for plunge milling. For finishing and side milling, choose a 4-flute end mill.
Pro Tip: Slot drills are made to plunge — start pockets and slots directly without a pilot hole.
Authorised Australian Dealer — This product is sourced from Sutton Tools and is backed by full Australian supplier warranty and local support.
Product Specifications
| Part No. | Cutting Dia. | Length | Flutes |
|---|---|---|---|
| E1000300 | 3mm | Standard | 2 |
| E1000600 | 6mm | Standard | 2 |
| E1000800 | 8mm | Short | 2 |
| E1001000 | 10mm | Short | 2 |
| E1001200 ★ | 12mm | Standard | 2 |
| E1001400 | 14mm | Standard | 2 |
| E1061500 | 15mm | Long | 2 |
| E1001600 | 16mm | Standard | 2 |
| E1001800 | 18mm | Short | 2 |
| E1022000 | 20mm | Long | 2 |
★ You are viewing the highlighted variant. Other sizes in this range are also available.
Browse our full range of end mills at Alltools Geelong.
Reviews
There are no reviews yet.