Description
Makita
Makita RP1800X05 Plunge Router — 1850W, 1/2″
Part No: RP1800X05 | Barcode: 88381784054
The Makita RP1800X05 is a powerful 1850W plunge router built for big joinery and profiling work. Its 1/2″ (12.7mm) collet swings large bits at 22,000rpm, while 0-70mm of plunge travel on linear ball bearings and fine 0.1mm depth adjustment give the control needed for accurate, repeatable cuts.
1850 W Motor
1/2″ (12.7 mm) Collet
22000 rpm
0-70 mm Plunge
0.1 mm Depth Steps
6.0 kg
Suitable For
Hardwood Joinery
Edge Profiling
Housing & Dado Cuts
Template Routing
Benchtops
Key Features & Benefits
- 1850W high-torque motor — handles large diameter panel-raising and profile bits in dense hardwood without slowing under load.
- 0-70mm plunge depth — deep plunge travel suits mortising, deep housings and through-cuts that smaller routers can’t reach.
- Linear ball-bearing rails — the plunge action glides smoothly and stays square for clean, consistent depth across repeat cuts.
- 0.1mm fine depth adjustment — dial in exact cutting depth with a precision adjuster for accurate rebates and inlays.
- Three-step depth stopper — preset turret lets you take a deep cut in controlled stages, reducing load and tear-out.
When to Use This Router
The RP1800X05 is a workshop router for cabinetmakers and joiners running large 1/2″ bits — panel raising, deep mortising, benchtop profiling and template work. Its power and 70mm plunge make it the choice when smaller 1/4″ trimmers and mid-size routers run out of capacity. Pair it with a router table for repeatable production profiling.
Pro Tip: For deep profiles, use the three-step turret stop to remove material in two or three passes rather than one — it keeps the 1850W motor in its sweet spot and produces a cleaner edge with far less burning on hardwoods.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Power | Collet | No-Load Speed | Type | Barcode |
|---|---|---|---|---|---|
| M3600B | 1650 W | 1/2″ | 23000 rpm | Plunge Router | 88381813372 |
| M3700B | 530 W | 1/4″ | 35000 rpm | Laminate Trimmer | 88381815741 |
| RP1800X05 ★ | 1850 W | 1/2″ | 22000 rpm | Plunge Router | 88381784054 |
| RP2301FC05 | 2100 W | 1/2″ | 9000-22000 rpm | Plunge Router | 88381782654 |
| RT0700CX | 710 W | 1/4″ | 10000-30000 rpm | Router / Trimmer | 88381634748 |
★ You are viewing the highlighted model. Other models in this range are also available.
Browse our full range of routers at Alltools Geelong.
Reviews
There are no reviews yet.