Description
Makita HP2051H — makita hammer drill available at Alltools Geelong. Shop our full makita hammer drill range in Geelong.
Makita
Makita HP2051H 20mm 2-Speed Hammer Drill — 720W
Part No: HP2051H | Barcode: 88381621861
The Makita HP2051H is a 720W two-speed percussion drill built for drilling masonry, steel and timber on site. A two-speed gearbox and rotation/hammer selector cover everything from fine high-speed boring to heavy 20mm masonry work.
720W
20mm Masonry
2-Speed Gearbox
0–2,900 rpm
Keyless Chuck
Torque Limiter
Drilling Capacity
Concrete 20mm
Steel 13mm
Wood 40mm
Key Features & Benefits
- 720W motor — delivers strong, consistent torque for sustained drilling into concrete, brick and block.
- Two-speed gearbox — pick high speed (0–2,900 rpm) for small bits in steel and timber, or low speed (0–1,200 rpm) for high-torque masonry boring.
- Rotation / hammer selector — switch between rotation-only drilling and rotation-with-hammer percussion for masonry.
- Built-in torque limiter — disengages the drive if the bit jams, protecting both the gearbox and the operator.
- Keyless chuck with forward/reverse — fast bit changes and easy fastener removal without a chuck key.
When to Use This Drill
Reach for the HP2051H when one drill needs to cover masonry anchoring, steel drilling and timber boring on the same job. The 20mm concrete capacity and two-speed gearbox make it a versatile general-purpose hammer drill for trades and serious DIY users who need more grunt than a combi driver.
Pro Tip: In hammer mode, run the low-speed gear for bits above 10mm in concrete — the extra torque keeps the bit cutting instead of polishing the hole, and reduces stalling in dense aggregate.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Power | No-Load Speed | Blows/min | Concrete | Steel | Wood | Weight | Barcode |
|---|---|---|---|---|---|---|---|---|
| HP2051H ★ | 720W | 0–1,200 / 0–2,900 rpm | 0–24,000 / 0–58,000 bpm | 20mm | 13mm | 40mm | 2.3kg | 88381621861 |
★ You are viewing the highlighted variant. Other models in this series are also available.
Browse our full range of hammer drills at Alltools Geelong.
Reviews
There are no reviews yet.