Description
Makita HR2811FT — makita rotary hammer available at Alltools Geelong. Shop our full makita rotary hammer range in Geelong.
Makita
Makita HR2811FT 28mm SDS-Plus Rotary Hammer — 800W
Part No: HR2811FT | Barcode: 88381083898
The Makita HR2811FT is an 800W three-mode SDS-Plus rotary hammer delivering 2.9 joules of impact energy for fast 28mm drilling and light chiselling in concrete. AVT anti-vibration, a torque limiter and an LED work light make it a comfortable all-day site tool.
800W
2.9J Impact
28mm Concrete
SDS-Plus
3-Mode
AVT
LED Light
Drilling & Chiselling
Concrete 28mm
3-Mode Operation
Variable Speed
Key Features & Benefits
- 800W motor, 2.9J impact energy — drives SDS-Plus bits up to 28mm into concrete quickly and with consistent hammering power.
- Three-mode operation — rotation only for drilling, rotation with hammering for masonry, and hammering only for light chiselling and chipping.
- AVT anti-vibration technology — cuts hand-arm vibration so the tool stays comfortable through extended drilling sessions.
- Torque limiter — the clutch disengages if the bit catches on reinforcement, protecting the operator from sudden twist.
- Variable speed with reverse and LED light — fine control on start-up plus a built-in job light for clear visibility in dark cavities.
When to Use This Rotary Hammer
Choose the HR2811FT for repetitive anchor and through-hole drilling in concrete and masonry, plus occasional light chipping. The 28mm capacity and three-mode action suit electricians, plumbers and fixers who need a do-everything corded hammer with low vibration and an SDS-Plus chuck for tool-free bit changes.
Pro Tip: Switch to hammering-only mode and fit a flat chisel to clear tile adhesive or chase shallow channels — the torque limiter stays out of the way in this mode, so you keep full chipping force.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Power | Impact Energy | No-Load Speed | Blows/min | Concrete | Chuck | Length | Barcode |
|---|---|---|---|---|---|---|---|---|
| HR2811FT ★ | 800W | 2.9J | 0–1,100 rpm | 0–4,500 bpm | 28mm | SDS-Plus | 345mm | 88381083898 |
★ You are viewing the highlighted variant. Other models in this series are also available.
Browse our full range of rotary hammers at Alltools Geelong.
Reviews
There are no reviews yet.