Description
Makita SP6000J — makita plunge cut saw available at Alltools Geelong. Shop our full makita plunge cut saw range in Geelong.
Makita
Makita SP6000J 165mm Plunge Cut Saw — 1300W
Part No: SP6000J | Barcode: 88381638999
The Makita SP6000J is a 1300W plunge cut saw built for clean, splinter-free cuts on a guide rail. Electronic variable speed, soft start and a 55mm depth of cut make it ideal for accurate panel breakdown, mitres and trench cuts in sheet material and solid timber.
1300W
165mm Blade
55mm @ 90°
Variable Speed
Guide-Rail Ready
MAKPAC Case
Suitable For
Sheet Material
Solid Timber
Laminated Board
Trench & Plunge Cuts
Key Features & Benefits
- 1300W motor with electronic speed control — maintains constant blade speed (2,000–5,200 rpm) under load for clean cuts in dense and laminated boards.
- 55mm depth of cut at 90° — cuts most sheet stock and solid timber in a single pass; 39mm at 45° for bevel work.
- Guide-rail compatible plunge action — rides Makita guide rails for dead-straight, splinter-free edges ready for joining without further trimming.
- Soft start and depth stopper — controlled start-up plus a depth stopper that enables scoring passes for splinter-free finish cuts.
- Kick-resistant design with MAKPAC case — reduces blade grab on plunge entry and stores and stacks neatly in the connector case.
When to Use This Plunge Saw
Reach for the SP6000J when you need furniture-grade, glue-ready edges from sheet goods — kitchen and cabinet installers, shopfitters and joiners breaking down melamine, MDF and ply. On a guide rail it replaces a panel saw for site work; the variable speed and scoring function deliver chip-free cuts on both faces.
Pro Tip: Make a shallow scoring pass at about 2mm depth along the rail first, then plunge to full depth on the second pass — pre-scoring eliminates top-face tear-out on melamine and veneered boards.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Power | Blade | Speed | Cut @ 90° | Cut @ 45° | Weight | Barcode |
|---|---|---|---|---|---|---|---|
| SP6000J ★ | 1300W | 165mm × 20mm bore | 2,000–5,200 rpm | 55mm | 39mm | 4.2kg | 88381638999 |
★ You are viewing the highlighted variant. Other models in this series are also available.
Browse our full range of plunge saws at Alltools Geelong.
Reviews
There are no reviews yet.