Description
Maxisafe
Maxisafe Phone Gripper with Coil Tether
Part No: ZH02039P | Barcode: 9342971000537
Stop your phone falling when working at height — this Maxisafe phone gripper wraps your smartphone in a load-rated silicon sleeve and a non-conductive coil tether so it stays securely attached to you on roofs, scaffolds and elevated platforms.
Maxisafe ZH02039P — phone gripper tether available at Alltools Geelong. Shop our full phone gripper tether range in Geelong.
Phone Drop Prevention
0.3 kg Max Load
Non-Conductive Tether
Coil Tether Included
No Adhesive Needed
ANSI/ISEA 121-2018
Suitable For
Roofing
Scaffolding
Tower & EWP Work
Telco / Linesmen
Construction at Height
Key Features & Benefits
- Custom silicon gripper — a purpose-made silicon sleeve grips the phone for strength and hold without a permanent connector on the device.
- No adhesives required — fits virtually every smartphone and leaves no residue or stuck-on tabs behind.
- Integrated load-rated eyelet — a built-in tether connection point links straight to the included coil tether.
- Non-conductive coil — the included coil tether is non-conductive, adding peace of mind around live electrical work.
- ANSI/ISEA 121-2018 compliant — meets the recognised dropped-object prevention standard.
When to Use This Tether
Reach for ZH02039P whenever a dropped phone could injure someone below or be lost from height. It fits phones from 13.5 × 6.5 × 0.7 cm up to 16 × 8 × 1 cm and tethers the device to your belt, harness or anchor point.
Pro Tip: Loop the coil tether through a harness D-ring or belt loop rather than a tool ring, so your phone stays within easy reach without tangling other lanyards.
Authorised Australian Dealer — This product is sourced directly from Maxisafe Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Type | Load / Capacity | Length | Config | Standard | Barcode |
|---|---|---|---|---|---|---|
| ZH02039P ★ | Phone Gripper + Coil Tether | 0.3 kg | Coil tether | Single | ANSI/ISEA 121-2018 | 9342971000537 |
| ZHL916 | Coil Hard Hat Tether | 0.5 kg | Approx. 86 cm coil | Single | ANSI/ISEA 121-2018 | 9341993002116 |
| ZTL01 | Tool Lanyard | 10 kg | 85–135 cm (stretch) | Single | — | 9341993008552 |
| ZTL02 | Twin Tool Lanyard | 10 kg | 85–135 cm (stretch) | Twin | — | 9341993008569 |
| ZTN01N | Tool Lanyard w/ Swivel Karabiner | 10 kg | 94–140 cm (stretch) | Single | ANSI/ISEA 121-2018 | 9341993003427 |
| ZRK903H | Premium Roofers Kit | 140 kg (1 person + tools) | 15 m rope line | Kit | AS/NZS 1891.1:2020 | 9342971008755 |
★ You are viewing the highlighted variant. Other variants in this series are also available.
Browse our full range of safety equipment at Alltools Geelong.
Reviews
There are no reviews yet.