Free Shipping On Orders $99+
We are a Hare & Forbes Geelong-based FREE Click & Collect point Hare & Forbes — FREE Click & Collect, Geelong Click here for details
Back to Spray & Putty Guns

Filters

,

Star Suction Feed Spray Gun 3.0mm S770-51S

$259.00

Star S770-51S suction-feed spray gun with a 3.0mm stainless steel nozzle and 1-litre pot, built for spraying heavy-bodied materials like putty, primer, underbody coatings and structural steel paint. High-volume suction design handles acrylics, 2-pack, water-based coatings and solvents.

Availability: 1 in stock

Shipping & returns info
Barcode: 9328042017901Brand: STARGTIN: 9328042017901 Categories: ,

Description

Star

Star S770-51S Suction Feed Spray Gun — 3.0mm Nozzle, 1L Pot

Part No: S770-51S  |  Barcode: 9328042017901

The Star S770-51S is a suction-feed spray gun with a 3.0mm stainless steel nozzle and 1-litre pot, made for spraying heavy-bodied materials such as putty, primer, glue, underbody black and structural steel paint. The large-bore nozzle passes thick coatings that would clog a finer gun, and it handles acrylic, 2-pack, water-based materials and solvents.

3.0mm Nozzle
1L Suction Pot
50-70 PSI
11 CFM
285mm Pattern
Stainless Nozzle & Needle

Suitable For

Spray Putty
Primer & Filler
Underbody Coatings
Structural Steel Paint
Glues & Adhesives

Key Features & Benefits

  • 3.0mm stainless steel nozzle — large orifice sprays high-build putties and primers without clogging, where a standard 1.4-1.8mm topcoat gun would block.
  • Suction-feed 1L pot — gravity-independent pickup lets you work at any angle and refill quickly on long jobs.
  • 285mm spray pattern — wide fan lays down more coverage per pass, cutting the number of passes on panels and structural steel.
  • Stainless nozzle and needle — resists corrosion from water-based and solvent materials for a longer service life.
  • Broad material compatibility — sprays acrylic, 2-pack, water-based coatings and solvents from one gun.

When to Use This Spray Gun

Reach for the S770-51S when you need to spray thick, high-build materials — putty, primer, underbody deadener or heavy industrial paint — rather than fine topcoats. The 3.0mm nozzle and suction pot suit panel shops, fabrication and structural steel work. For fine finish topcoats, choose a smaller 1.4-1.8mm gun instead.
Pro Tip: Keep inlet pressure in the 50-70 PSI band — over-pressuring a 3.0mm suction gun atomises too fine for high-build material and causes dry spray and overspray. Thin putty only as far as the data sheet allows to keep the wide fan even.

Product Specifications

Star S770 Suction Spray Gun Series
Part No. Nozzle Pot Feed
S770-31S 2.0mm 1L Suction
S770-51S ★ 3.0mm 1L Suction

Reviews

There are no reviews yet.

Be the first to review “Star Suction Feed Spray Gun 3.0mm S770-51S”