Description
BMI
BMI 695 HighPrecision Aluminium Spirit Level — 200 cm
Part No: 695-200-HP | Barcode: 4007368101109 | Series: 695 HP
The BMI 695 HighPrecision is a German-engineered aluminium spirit level built for trade-grade accuracy and lifetime survival on site. Its domed magnifying vial reads roughly five times more precisely than a standard level, holding tolerance to 0.3 mm per metre on milled faces.
Length: 200 cm
Accuracy 0.3 mm/m
2 Vials
4-Chamber Profile
2 mm Box-Section
Made in Germany
Dual Handles
Key Features & Benefits
- 0.3 mm/m guaranteed accuracy — roughly 5× tighter than a builder’s grade level, so plumb and level reference is true enough for tile setting, machine bases and steel installs.
- Domed magnifying round vial — original BMI design enlarges the bubble in the eye-line, killing parallax error and giving a fast, definite read in poor light.
- Ultrasonic-welded vials — sealed vial body cannot leak, fog or shift its block alignment after a drop or a hot van.
- Torsion-resistant 4-chamber profile — the closed box section resists twist when the level is held one-handed against a long surface, protecting the reading.
- 2 mm thick aluminium box-section — heavy-gauge wall, not the thin extrusion used on consumer levels; survives daily site abuse.
- Two milled measuring faces — both reference edges are machined flat and parallel for plumb and level use without flipping bias.
- Shock-absorbing rubber end caps — soak up the inevitable end-drops that knock cheaper levels out of calibration.
- Twin moulded handles — both hands carry the long beam evenly, reducing flex on the wall and protecting the milled faces from scuffs in transit.
When to Use This Level
Reach for the 695-200-HP when the job needs a verifiable, factory-set reference rather than a “good enough” check — installing kitchens and joinery, hanging doors, setting machinery feet, lining up steel, or running long masonry and tile work. At 200 cm this is one of the longer levels in the 695 range — best for door frames, long benchtops, decking runs, masonry courses and any reference longer than a single carpenter’s arm-span. Pair it with a BMI 710 padded carry bag to keep the milled faces protected between jobs.
Authorised Australian Dealer — This product is backed by full Australian manufacturer warranty from BMI Tools Australia, with local support and service.
Product Specifications
| Part No. | Length | Vials | Handles | Barcode |
|---|---|---|---|---|
| 695-040-HP | 40 cm | 2 | — | — |
| 695-060-HP | 60 cm | 2 | — | — |
| 695-080-HP | 80 cm | 2 | — | — |
| 695-100-HP | 100 cm | 2 | — | — |
| 695-120-HP | 120 cm | 2 | — | 4007368101086 |
| 695-150-HP | 150 cm | 2 | — | — |
| 695-180-HP | 180 cm | 2 | Dual | — |
| 695-200-HP ★ | 200 cm | 2 | Dual | 4007368101109 |
★ You are viewing the highlighted variant. Other lengths in this series are also available.
Browse our full range of hand tools at Alltools Geelong.
Reviews
There are no reviews yet.