Description
Wiss
Crescent Wiss WF18 Sheet Metal Folding Tool — 450mm
Part No: WF18 | Barcode: 37103239952
The Crescent Wiss WF18 folds and flattens sheet metal by hand across a 450mm (18″) jaw. Two folding channels — 3/8″ and 1″ depth — let you set consistent bends for drive cleats, register boots, end caps and plenums. Built from heavy 1.6mm (16-gauge) steel, the jaws stay parallel under load so folds come out straight and uniform along the full length.
450mm (18″) Jaw
3/8″ & 1″ Channels
1.6mm Steel Body
3.7kg
Two Throat Depths
HVAC Sheet Metal
Suitable For
HVAC Ductwork
Drive Cleat Folds
Register Boots
End Caps & Plenums
Sheet Metal Fabrication
Key Features & Benefits
- Dual 3/8″ and 1″ folding channels — pick the throat depth to match the job so every fold lands at the same, repeatable depth.
- Heavy 1.6mm steel construction — the folding channels resist widening under repeated use, keeping bends precise over the tool’s life.
- 450mm jaw length — makes long, uniform bends in one pass for straight seams and clean channels.
- Hand-operated leverage — folds and flattens sheet on site without a brake or bench machine.
- Purpose-built for HVAC — designed around drive cleat, boot and plenum work where consistent folds matter.
When to Use This Folding Tool
Reach for the WF18 for on-site HVAC and sheet metal work — folding drive cleats, forming register boots, end caps and plenums, or flattening seams where carrying a bench brake isn’t practical. It suits sheet metal workers and HVAC installers. For high-volume shop folding a bench brake is faster; the WF18 is the portable hand option.
Product Specifications
| Part No. | Jaw Length | Channels | Material | Weight |
|---|---|---|---|---|
| WF18 ★ | 450mm (18″) | 3/8″ & 1″ | 1.6mm Steel | 3.7kg |
Browse our wide range of hand tools at Alltools Geelong.
Reviews
There are no reviews yet.