Description
Carbitool
TTC706B 1/2 Triple Cove Router Bit with Ball Bearing — 1/2″ Shank
Part No: TTC 706 B 1/2 | Barcode: 9314350001725 | Product Group: R628 | Discount Group: Z0904
The Carbitool TTC 706 B 1/2 is a 2-flute carbide-tipped triple cove router bit with ball bearing guide and 1/2″ shank. Three cove radii on a single cutter create an intricate decorative edge profile, with multiple sub-profiles accessible by varying bearing size and bit height.
2 Flute
Carbide Tipped
Ball Bearing Guide
Triple Cove Profile
1/2″ Shank
Multiple Profiles
Suitable For
Hardwood
Softwood
Decorative Furniture
Panel Doors
Architectural Mouldings
Key Features & Benefits
- Triple cove profile — three cove radii (3/16″ and 1/4″) on a single cutter deliver the most complex profile in the Carbitool cove range, suitable for high-end reproduction furniture and architectural moulding work.
- Three radii can be used separately or in combination — use height adjustment to engage only one or two of the cove zones, dramatically increasing the number of distinct profiles achievable from a single bit.
- Variable bead options — fit a TB9 bearing for the standard cove design; switch to a TB11 bearing to eliminate the bottom bead. Height adjustment controls the top bead independently.
- 2-flute carbide-tipped construction — handles continuous production runs in hardwood mouldings without losing profile definition.
- 1/2″ shank — handles the elevated cutting loads of a triple-profile bit; router table use is required.
When to Use This Bit
The TTC 706 B 1/2 is the premium choice in the Carbitool cove series when maximum profile variety is required. Use it for decorative furniture mouldings, period reproduction work, high-end cabinetry, and architectural millwork where the edge profile is a design feature in its own right. The three cove sections mean this single bit can replace several separate profile bits by varying height and bearing. For a simpler double cove, use the TDC 706 B 1/2; for a single cove, the Carbitool R625 cove series.
Pro Tip: Mark out which cove zone you are targeting before each pass — a pencil line on your fence or height-gauge mark avoids accidentally engaging the wrong zone. Make multiple shallow passes when engaging the full triple profile in one run.
Product Specifications
| Part No. | A (Cutting Dia.) inch | A mm | B (Cut Length) inch | B mm | C (Overall Length) inch | C mm | R1 mm | R2 mm | Shank inch | Shank mm | Barcode |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TTC 706 B 1/2 ★ | 1-7/8 | 47.63 | 1 | 25.40 | 3-1/4 | 82.55 | 4.76 | 6.35 | 1/2 | 12.70 | 9314350001725 |
| TTC 708 B 1/2 | 2-1/4 | 57.15 | 1-1/8 | 28.58 | 3-3/8 | 85.73 | 6.35 | 7.94 | 1/2 | 12.70 | 9314350001732 |
★ You are viewing the highlighted variant. Replacement bearing: TB9 (standard cove) or TB11 (eliminates bottom bead).
Reviews
There are no reviews yet.