Makita
18V LXT Angle Impact Driver — 60 Nm, 53 mm Rotating Head
Part No: DTL061Z | Barcode: 88381664240
Makita’s DTL061Z is an 18V angle impact driver with a 360° rotating head just 53 mm tall, delivering 60 Nm of torque for fastening in tight spaces where inline drivers cannot reach. The variable-speed trigger and electric brake give precise control when driving screws close to edges and corners.
60 Nm Torque
3,000 IPM
2,000 RPM
53 mm Head Height
360° Rotating Head
1.7 kg
18V LXT Platform
Suitable For
Tight-Access Framing
Cabinetry
Joist Bays
Electrical Work
Plumbing Brackets
Furniture Assembly
Key Features & Benefits
- 360° Rotating Head — the head locks at any angle, letting you approach fasteners from the optimal direction in cramped ceiling cavities, between studs, or behind fixtures.
- 53 mm Head Height — the slim profile fits into spaces where even compact right-angle drivers struggle, especially between closely spaced joists and behind switchboards.
- 60 Nm Fastening Torque — drives M4–M12 bolts and coarse-thread screws up to 75 mm, covering most light-to-medium fastening tasks in confined areas.
- Electric Brake — stops the bit instantly when you release the trigger, preventing overdriving and screw-head damage in visible finish work.
- LED Job Light with Afterglow — illuminates the work area and stays lit briefly after releasing the trigger so you can inspect the fastener in dark cavities.
- Extra-Long Switch Lever — provides comfortable trigger reach even when gripping the tool at awkward angles in overhead or behind-the-wall positions.
When to Use This Angle Impact Driver
The DTL061Z fills the gap between a standard inline impact driver and a right-angle drill for trades who need genuine impact-driving torque at odd angles. Electricians running screws behind boards, plumbers securing brackets between joists, and cabinet makers fastening in blind corners all benefit from the rotating head that lets you line up the bit without contorting your wrist. At 60 Nm it handles most general fastening — for heavier structural work in tight spaces, consider the Milwaukee M12BRAID-0 with its 68 Nm output.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 18V LXT |
| Max Torque | 60 Nm |
| No-Load Speed | 0–2,000 RPM |
| Impacts Per Minute | 0–3,000 |
| Drive | 1/4″ Hex |
| Head Height | 53 mm |
| Head Rotation | 360° |
| Overall Length | 387 mm |
| Machine Screw Capacity | M4–M8 |
| Standard Bolt Capacity | M4–M12 |
| Screw Capacity | 22–75 mm |
| Weight (bare) | 1.7 kg |
| Motor | Brushed |
Reviews
There are no reviews yet.