Makita
18V LXT Brushless Heavy Duty 13 mm Hammer Drill Driver — 141 Nm
Part No: DHP486Z | Barcode: 88381739566
Makita’s DHP486Z is an 18V LXT brushless hammer drill driver that packs 141 Nm of peak torque into a compact 178 mm body. The all-metal gear housing and 21-stage clutch deliver the durability and precision needed for heavy-duty trade work across masonry, steel, and timber.
141 Nm Torque
31,500 BPM
2,100 RPM
13 mm Metal Chuck
21-Stage Clutch
178 mm Length
18V LXT Platform
Suitable For
Masonry
Timber Framing
Steel
Concrete Block
Cabinetry
General Construction
Key Features & Benefits
- 141 Nm Peak Torque — handles heavy-duty drilling and driving tasks including large-diameter auger bits in hardwood and masonry anchor holes without stalling.
- Brushless Motor — delivers longer run time per charge, reduced maintenance, and consistent power output compared to brushed motor equivalents.
- 21-Stage Clutch — provides fine torque control for consistent screw depth in cabinetry, joinery, and plasterboard without overdriving or stripping.
- All-Metal Gear Housing — aluminium construction dissipates heat and withstands impacts from site use far better than plastic housings.
- Compact 178 mm Length — fits into narrow spaces between studs and behind fixtures while maintaining the power output of a full-size hammer drill.
- 2-Speed Mechanical Gearbox — low range (0–550 RPM) for high-torque driving and self-feeding bits, high range (0–2,100 RPM) for fast drilling and hammer action.
When to Use This Hammer Drill
The DHP486Z is Makita’s heavy-duty answer for trades who need a single drill that handles everything from delicate hinge work to punching through masonry. The 21-stage clutch gives you precise screw-depth control for cabinetry and joinery work on the low end, while the 31,500 BPM hammer action and 141 Nm of torque power through brick and block for anchor fixings at the other extreme. Its 76 mm hole saw capacity in timber means it doubles as a rough-in drill for plumbers and electricians. For SDS-class concrete drilling, pair it with a dedicated rotary hammer — but for everything else, this is the one drill to carry on your belt.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 18V LXT |
| Max Torque | 141 Nm |
| Speed Range 1 | 0–550 RPM |
| Speed Range 2 | 0–2,100 RPM |
| Impact Rate (Hi/Lo) | 31,500 / 8,250 BPM |
| Chuck | 13 mm Keyless |
| Clutch Settings | 21 |
| Max Drilling — Masonry | 16 mm |
| Max Drilling — Steel | 13 mm |
| Max Drilling — Wood (Auger) | 50 mm |
| Max Drilling — Wood (Hole Saw) | 152 mm |
| Max Drilling — Wood (Self-Feed) | 76 mm |
| Body Length | 178 mm |
| Weight (bare) | 2.8 kg |
| Motor | Brushless |
Reviews
There are no reviews yet.