Makita
18V LXT 10 mm Angle Drill — 13.7 Nm, Compact 93 mm Head
Part No: DDA351Z | Barcode: 88381668057
Makita’s DDA351Z is a compact 18V angle drill with a 93 mm head height and 10 mm keyless chuck, designed for drilling in tight spaces between joists, studs, and behind fixtures. The metal gear housing and 1,800 RPM output handle sustained use in hardwood and steel.
13.7 Nm Torque
1,800 RPM
10 mm Chuck
93 mm Head Height
1.8 kg
LED Light
18V LXT Platform
Suitable For
Timber Framing
Steel (10 mm)
Joist Bays
Stud Walls
Ceiling Cavities
Behind Fixtures
Key Features & Benefits
- Compact 93 mm Head Height — fits between closely spaced joists and behind mounted fixtures where standard drills cannot reach.
- Metal Gear Housing — aluminium construction dissipates heat and withstands the impacts of daily site use far better than plastic housings.
- 10 mm Keyless Chuck — quick bit changes without a chuck key, accommodating drill bits up to 10 mm for most pilot and clearance holes.
- Large Lever Switch — variable-speed control is accessible even when gripping the tool at awkward angles in overhead and tight-access positions.
- Forward/Reverse Rotation — allows backing out stuck bits and driving/removing screws in addition to drilling applications.
- LED Job Light — illuminates the work area in dark cavities and ceiling spaces where ambient light does not reach.
When to Use This Angle Drill
The DDA351Z is the go-to angle drill for electricians, plumbers, and data cablers who need to drill pilot holes and clearance holes in timber framing between joists and studs. At 93 mm head height it fits where inline drills cannot, and the 10 mm chuck handles standard twist bits, spade bits, and small hole saws for running cables and pipes. This is a drilling tool — for impact-driving screws in tight spaces, pair it with the DTL061Z angle impact driver or Milwaukee M12BRAID-0. For larger holes requiring auger bits up to 32 mm, consider the DDA450Z brushless model with its higher torque output.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 18V LXT |
| Max Torque | 13.7 Nm |
| No-Load Speed | 0–1,800 RPM |
| Chuck | 10 mm Keyless |
| Head Height | 93 mm |
| Max Drilling — Steel | 10 mm |
| Max Drilling — Wood | 25 mm |
| Overall Length | 395 mm |
| Weight (bare) | 1.8 kg |
| Motor | 4-Pole Brushed |
Reviews
There are no reviews yet.