Makita
DTW700Z — 18V Brushless 1/2″ Mid-Torque Impact Wrench
Part No: DTW700Z | Barcode: 88381723831
The Makita DTW700Z is an 18V brushless mid-torque impact wrench delivering 700Nm fastening torque and 1,000Nm nut-busting torque through a 1/2″ square drive. With 4-speed electronic power selection, XPT dust and water protection, and auto-stop in both directions, it bridges the gap between compact and high-torque wrenches for versatile automotive and construction fastening.
18V Brushless
1/2″ Drive
700Nm Fastening
1,000Nm Nut-Busting
4-Speed Selection
XPT Protected
Auto-Stop
2.3kg Bare
Suitable For
Automotive Service
Construction Fastening
Scaffolding
Heavy Mechanical
Key Features & Benefits
- 700Nm fastening / 1,000Nm nut-busting torque — handles M10–M22 bolts including wheel nuts, scaffold couplers, and structural connections without needing a dedicated high-torque wrench.
- 4-speed electronic power selection — Soft (150Nm), Medium (200Nm), Hard (320Nm), and Max (700Nm) let you match torque precisely to the fastener, from delicate trim bolts to heavy scaffold clamps.
- Brushless motor with 430W output — delivers sustained power under load with longer runtime and reduced heat compared to brushed motors.
- Auto-stop in forward and reverse — automatically shuts off when the fastener is fully seated (forward) or fully removed (reverse), preventing over-torque and dropped fasteners.
- XPT (Extreme Protection Technology) — sealed internals resist dust and water ingress for reliable operation on outdoor construction sites and in wet conditions.
- 1/2″ square drive with C-ring — universal socket compatibility with secure C-ring retention for standard impact sockets.
- Built-in LED work light — illuminates the fastener for visibility in dark engine bays, under vehicles, and during evening site work.
- Compact 276mm length at 2.3kg — lighter and shorter than full high-torque wrenches while delivering significantly more torque than compact models.
When to Use This Impact Wrench
The DTW700Z sits in the mid-torque sweet spot — enough power for wheel nuts, scaffold couplers, and structural bolts up to M22, but lighter and more compact than dedicated high-torque wrenches. Choose this when you need more torque than the compact DTW300Z (330Nm) but don’t need the full 1,000Nm+ of a high-torque wrench for every-day tasks. The 4-speed selection makes it versatile across a wide range of fastener sizes, and the auto-stop prevents the over-tightening that damages threads and components.
Product Specifications
| Part No. | Class | Fastening Torque | Nut-Busting Torque | Max RPM | Drive | Weight |
|---|---|---|---|---|---|---|
| DTW700Z ★ | Mid-Torque | 700Nm | 1,000Nm | 2,200 | 1/2″ C-Ring | 2.3kg |
| DTW300Z | Compact | 330Nm | 580Nm | 3,200 | 1/2″ | 1.5kg |
| DTW251Z | Standard | 230Nm | — | 2,100 | 1/2″ | 1.7kg |
| DTW1001Z | High-Torque | — | — | — | 3/4″ | — |
| DTW1002Z | High-Torque | — | — | — | 1/2″ | — |
★ You are viewing the highlighted variant. Other models in this series are also available.
Reviews
There are no reviews yet.