Milwaukee
M18 FUEL SUPER HAWG 13 mm Right Angle Drill — 122 Nm, 2-Speed
Part No: M18FRAD2-0 | Barcode: 4892210180575
Milwaukee’s M18FRAD2-0 SUPER HAWG is a heavy-duty 18V FUEL right angle drill delivering 122 Nm of torque through a 2-speed gearbox and 13 mm keyed chuck. Built for electricians and plumbers who drill large holes through structural timber with self-feed bits and hole saws up to 159 mm.
122 Nm Torque
1,550 RPM
13 mm Keyed Chuck
2-Speed Gearbox
159 mm Hole Saw Capacity
FUEL Brushless
18V M18 Platform
Suitable For
Structural Timber
Hardwood Beams
Floor Joists
Wall Studs
Steel (13 mm)
Rough-In Work
Key Features & Benefits
- 122 Nm POWERSTATE Brushless Motor — drives self-feed bits up to 117 mm and hole saws up to 159 mm through hardwood beams without stalling.
- 2-Speed Gearbox — low range (0–500 RPM) for maximum torque with large-diameter bits, high range (0–1,550 RPM) for smaller bits and faster drilling.
- Up to 80 Holes Per Charge — drills up to 80 × 65 mm holes through 150 mm timber beams on a single 6.0 Ah HIGH OUTPUT battery.
- 13 mm All-Metal Keyed Chuck — locks large-diameter auger bits and self-feed bits securely with zero slippage under high torque loads.
- Removable Metal Side Handle — provides two-handed control and bracing when drilling large holes where bit jamming can twist the tool violently.
- REDLINK PLUS Intelligence — protects the tool and battery from overload while optimising power delivery for sustained high-torque drilling.
When to Use This Right Angle Drill
The M18FRAD2-0 SUPER HAWG is the heavy-duty right angle drill for trades who drill large holes through structural timber all day. Electricians running conduit through floor joists, plumbers boring for pipe runs through wall frames, and HVAC installers cutting holes for ductwork in beams all need the 122 Nm output and 159 mm hole saw capacity that smaller right angle drills cannot deliver. The 2-speed gearbox is essential — use low gear for self-feed bits where the high torque prevents bit stalling in hardwood, and high gear for auger bits and smaller holes where speed matters more. This is not an occasional-use tool; it is built for trades who make 50+ large holes a day.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 18V |
| Max Torque | 122 Nm |
| Speed Range 1 | 0–500 RPM |
| Speed Range 2 | 0–1,550 RPM |
| Chuck | 13 mm All-Metal Keyed |
| Max Drilling — Steel | 13 mm |
| Max Drilling — Wood (Auger) | 40 mm |
| Max Drilling — Wood (Self-Feed) | 117 mm |
| Max Drilling — Wood (Hole Saw) | 159 mm |
| Motor | POWERSTATE Brushless |
| Battery Platform | M18 REDLITHIUM |
| Warranty | 5 Years |
Reviews
There are no reviews yet.