Milwaukee
M18FN15GA-0C FUEL 15 Gauge Angled Finish Nailer — 18V Brushless
Part No: M18FN15GA-0C | Barcode: 4892210198976
The Milwaukee M18FN15GA-0C is an 18V FUEL brushless 15 gauge angled finish nailer that eliminates the need for a compressor and hose. Using a nitrogen air spring mechanism combined with the POWERSTATE brushless motor and REDLINK PLUS intelligence, it delivers pneumatic-like driving performance with zero ramp-up time, firing up to 3 nails per second and driving 32–63mm DA-style angled finish nails consistently to depth in both hard and soft timbers.
18V FUEL
15 Gauge (1.8mm)
32–63mm Nails
34° Angled Magazine
110 Nail Capacity
750 Nails/Charge
Brushless
Skin Only
Suitable Applications
Architrave
Skirting Boards
Door & Window Casing
Crown Moulding
Stair Trim
Cabinetry
Hardwood
Softwood
Key Features & Benefits
- Nitrogen air spring mechanism — delivers consistent pneumatic-like driving force with zero ramp-up time from nail to nail, sinking nails flush in both hard and soft timbers without adjustment.
- POWERSTATE brushless motor — maximises runtime, power output and motor life compared to brushed alternatives, maintaining peak performance throughout the battery charge.
- REDLINK PLUS intelligence — electronic overload protection prevents damage to the tool, battery and nailing surface during heavy use.
- Fires in 0.05 seconds, up to 3 nails per second — rapid cycling speed keeps pace with production finishing work without the lag of compressed air recovery.
- Sequential and contact actuation modes — switch between precision single-shot placement and rapid bump-fire for production nailing, all without tools.
- 34° angled magazine with 110-nail capacity — the angled design reaches into tight corners and confined spaces that straight nailers cannot access, while the high capacity reduces reload stops.
- 32–63mm nail range (DA-style 15 gauge) — covers the full spectrum of finish nailing from lightweight trim to heavy architrave and door casing in a single tool.
- 750 nails per charge — paired with an M18 REDLITHIUM 2.0Ah battery, a full day of trim work is achievable without swapping batteries.
- Compact, lightweight design at 2.9 kg — reduces fatigue during extended overhead and vertical nailing, with clear sightlines to the nail point for accurate placement.
- Angled battery bay — allows the nailer to stand upright on flat surfaces when not in use, keeping it accessible and reducing tip-over risk.
When to Use This Nailer
Choose the M18FN15GA-0C for all 15 gauge angled finish nailing tasks where you need portability and the holding power of a thicker 15GA nail. It is the go-to for fitting architrave, skirting, door and window casings, crown moulding and stair trim in both new builds and renovation work. The 34° angled magazine gets into corners and against walls where a straight nailer would not fit. As a skin-only tool, it suits any tradesperson already on the M18 platform.
Pro Tip: Use sequential firing mode for precision placement on visible trim, and switch to contact actuation for fast production runs on concealed framing trim. When nailing hardwood like Tas Oak or Jarrah, use nails at the shorter end of the range (32–45mm) to avoid splitting — and always test on an offcut first.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Voltage | Nail Gauge | Nail Size Range | Collation Angle | Magazine Capacity | Nails per Charge | Weight (bare) | Barcode |
|---|---|---|---|---|---|---|---|---|
| M18FN15GA-0C ★ | 18V | 15GA (1.8mm) | 32–63mm | 34° | 110 | 750 | 2.9 kg | 4892210198976 |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.