Description
Milwaukee M18FHP-0 — m18 fuel sds plus rotary available at Alltools Geelong. Shop our full m18 fuel sds plus rotary range in Geelong.
Milwaukee
M18 FUEL 26 mm SDS Plus Rotary Hammer — 2.7 J, AUTOSTOP, 3-Mode
Part No: M18FHP-0 | Barcode: 4892210196798
Milwaukee’s M18FHP-0 is an 18V FUEL brushless 26 mm SDS Plus rotary hammer delivering 2.7 J of impact energy with AUTOSTOP kickback control. Three operating modes and 4,800 BPM make it the mid-range FUEL hammer for trades who need more power than the HD18H-0 without stepping up to SDS Max.
2.7 J Impact Energy
26 mm Concrete Capacity
4,800 BPM
1,330 RPM
3-Mode Operation
AUTOSTOP Safety
18V M18 Platform
Suitable For
Concrete
Reinforced Concrete
Masonry
Brick
Block
Light Chiselling
Key Features & Benefits
- 2.7 J Impact Energy — noticeably more powerful than the HD18H-0 (2.4 J), handling anchors up to M16 and faster drilling in dense concrete and aggregate.
- AUTOSTOP Kickback Control — senses a bind-up in rebar or hard aggregate and stops rotation before the tool kicks back, protecting the operator.
- 3-Mode Selector — hammer drilling, rotation only, and hammer only for the full range of concrete, steel, timber, and light chiselling applications.
- POWERSTATE Brushless Motor — delivers consistent power with longer runtime per charge compared to the brushed HD18H-0.
- 26 mm Concrete Capacity — covers Dynabolts, sleeve anchors, and chemical anchors up to M16 in a single SDS Plus platform tool.
- Optimised for HIGH OUTPUT Batteries — delivers maximum performance on M18 HIGH OUTPUT 6.0 Ah packs for sustained heavy drilling.
When to Use This Rotary Hammer
The M18FHP-0 is the FUEL-class upgrade from the HD18H-0 for trades who drill concrete regularly and need the extra power, safety, and brushless efficiency. The 2.7 J output and AUTOSTOP technology make it the best choice for drilling near reinforcement where bind-up risk is highest. Its 26 mm capacity covers M16 anchors — the most common large trade fixing. For occasional concrete drilling, the HD18H-0 at 2.4 J is sufficient and more affordable. For heavy-duty SDS Max work above 26 mm, step up to the M18FHM-0.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Tool Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Specification | Value |
|---|---|
| Voltage | 18V |
| Impact Energy | 2.7 J |
| No-Load Speed | 0–1,330 RPM |
| Impacts Per Minute | 0–4,800 |
| Max Drilling — Concrete | 26 mm |
| Chuck Type | SDS Plus |
| Operating Modes | 3 (Drill / Hammer Drill / Hammer) |
| Safety | AUTOSTOP Kickback Control |
| Motor | POWERSTATE Brushless |
| Battery Platform | M18 REDLITHIUM |
| Warranty | 5 Years |
Reviews
There are no reviews yet.