Milwaukee
M12FPTR-0 FUEL INSIDER Pass-Through Ratchet 12V
Part No: M12FPTR-0 | Barcode: 4892210235916
M12 FUEL brushless pass-through ratchet with triple-drive output — 3/8-inch, 1/2-inch, and 1/4-inch hex. Delivers 81Nm of torque at 350 RPM with a 21.45mm head profile. The pass-through design handles threaded rod and studs up to 15mm diameter. Ships with sockets from 8mm to 21mm. Dual LEDs illuminate both sides of the work area.
M12 FUEL
Brushless
Pass-Through
81 Nm
3 Drive Sizes
Sockets Included
Suitable For
Automotive
Threaded Rod
Plumbing
HVAC
Electrical
Key Features & Benefits
- Pass-through design — the hollow head lets threaded rod and studs up to 15mm pass straight through, eliminating the need for deep sockets or the tedious on-off-on cycle of conventional ratchets on long fasteners.
- Triple-drive output — 3/8-inch square, 1/2-inch square, and 1/4-inch hex in one tool covers virtually every socket and bit in a standard kit without adapters or second tools.
- 81Nm FUEL brushless torque — the highest torque in the M12 ratchet range, breaking free corroded nuts and running down structural bolts that lower-torque ratchets cannot handle.
- Included socket set (8–19mm + 21mm) — ships ready to work out of the box with pass-through sockets that fit the most common metric fastener sizes encountered in automotive and trade work.
- 21.45mm low-profile head — slim enough to access fasteners between components, pipes, and wiring where a standard socket wrench head would not fit.
- Dual LEDs — two work lights illuminate both sides of the socket simultaneously, eliminating shadows in deep cavities and engine bays.
The Ratchet That Handles Threaded Rod
The INSIDER solves the long-fastener problem that every mechanic and HVAC installer knows — running a nut down 200mm of threaded rod with a normal ratchet means constant removal and repositioning. The pass-through head lets the rod slide through the tool while the socket drives the nut, turning a five-minute job into a thirty-second one. The included socket set means no separate purchase needed.
Authorised Australian Dealer — This product is sourced directly from Milwaukee Australia and is backed by full Australian manufacturer warranty and local support.
Product Specifications
| Part No. | Type | Drive | Torque | Speed | Head Profile | Length |
|---|---|---|---|---|---|---|
| M12IR-0 | Impact Ratchet | 3/8″ | 47 Nm | 250 RPM | — | Standard |
| M12FIR12-0 | FUEL Impact Ratchet | 1/2″ | 81 Nm | 200 RPM | — | Standard |
| M12FIR38-0 | FUEL Impact Ratchet | 3/8″ | 75 Nm | 200 RPM | 19 mm | 281 mm |
| M12FIR38LR-O | FUEL Extended Ratchet | 3/8″ | 75 Nm | 200 RPM | 19.3 mm | 363 mm |
| M12FHIR38LR0 | FUEL High Speed Ext. | 3/8″ | 47.5 Nm | 450 RPM | 19 mm | Extended |
| M12FPTR-0 ★ | FUEL Pass-Through | 3/8″ + 1/2″ + 1/4″ | 81 Nm | 350 RPM | 21.45 mm | 386 mm |
Reviews
There are no reviews yet.