Description
Sutton Tools L100V2EN — sutton engineers black book 2nd available at Alltools Geelong.
Sutton Tools
Sutton Engineers Black Book — 2nd Edition
Part No: L100V2EN | Barcode: 9781921722349 | Publisher: Sutton Tools
The Sutton Engineers Black Book 2nd Edition is the workshop-reference book every tradesperson, engineer and apprentice keeps within reach. Over 160 matt-laminated grease-proof pages cover the tables, standards and formulae you actually reach for — tapping drill sizes, speeds and feeds, tolerances, thread data and more — in a wire-bound format that lies flat on the bench.
160+ Pages
Wire-Bound
Grease-Proof Laminate
Metric & Imperial
Drill Gauge Included
What’s Inside
Tapping Drill Sizes
Speeds & Feeds
Tolerances
Thread Data & Tapers
Bolts & Nuts
Spur Gear Calculations
Hardening & Tempering
Weights of Metals
Tungsten Carbide
Plastics
Lubricants & Coolants
G Codes
Key Features & Benefits
- Matt-laminated grease-proof pages — wipe clean of oil and coolant without ink smudging; glare-free under shop lighting and readable in dim light.
- Wire-bound flat-lay format — the book stays open on the bench hands-free while you read a table and set up a cut; no holding pages down with a dirty hand.
- Comprehensive reference content — tapping drills, speeds and feeds for common materials, tolerances, thread dimensions, taper data, gear calculations, hardening schedules, G-code reference and more in one pocket-size book.
- Metric and imperial coverage — conversion factors and dual-scale tables suit modern metric and legacy imperial work without hunting through separate references.
- Metal drill identification gauge included — a high-quality drill-size gauge included with the book; saves rummaging for a lost drill-index tab.
When to Use the Engineers Black Book
Reach for the Black Book whenever you need a quick reference at the machine — the right tapping drill for an M10 thread, the feed rate for 316 stainless in the mill, the tolerance class for a running fit, or the speed for a 1/2″ cutter in tool steel. It’s a time-saver at the lathe, mill, drill press or bench; apprentices learn from it, tradespeople rely on it, and engineers use it to sanity-check drawings on the shop floor.
Pro Tip: The speeds-and-feeds tables give a good starting point, but every shop’s machine condition, tool sharpness and fixture stiffness is different. Use the table value for the first pass, then trust your eyes and ears — if the chip colour is straw brown in steel or the cutter chatters, adjust from there. The book is a starting point, not a gospel.
Authorised Australian Dealer — This product is sourced directly from Sutton Tools Australia and is backed by full Australian manufacturer warranty and local support.
Reviews
There are no reviews yet.