Description
HAFCO-METALMASTER
Mill Drill – Geared & Tilting Head – 415V — HM-46B, Table Travel: (X) – 485mm (Y) – 175mm (Z) – 430mm Includes Digital Readout System & Dovetail Column
Part No: M139D | Barcode: 9344195250576 | Model: HM-46B
HAFCO-METALMASTER HM-46B Mill Drill – Geared & Tilting Head – 415V (Table Travel: (X) – 485mm (Y) – 175mm (Z) – 430mm Includes Digital Readout System & Dovetail Column). This HM-46B 415V milling machines is similar in overall size to the popular HM-32 but with the additional benefit of a 3-Axis digital readout…
Model HM-46B
Table Size: 730 x 210 mm
Spindle Taper – Vertical: 3MT
Spindle to Table: 485 mm
Spindle Travel / Diameter: 120 / 75 mm
Throat Depth (max.): 265 mm
Drilling Capacity: 31.5 mm
Key Features & Benefits
- 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
- Gear driven head 6 speeds
- Dovetail vertical Z-axis
- Mill head tilts to ±90º from vertical with digital display
- Large 730 x 210mm ground work table with T-slots
- Adjustable leadscrew nuts eliminating backlash on both axis
- Fine feed hand wheel operating quill feed
- Forward and reverse on/off button switches
- Digital tilting head gauge
- 3MT spindle with 75mm diameter quill
- Adjustable table and drill length stops
- Rack and pinion wind-up head
- Rear slide-way cover and slide clamps on all axis
- Spindle lock for quill
- Table lock on both axis
- Metric dial graduations @ 0.05mm for X & Y axis
- LED work light
- * Note: X & Y travels maybe reduced due to digital readout scales and safety stops
- * Note: Digital readout requires 10amp 240V power
About This Product
This HM-46B 415V milling machines is similar in overall size to the popular HM-32 but with the additional benefit of a 3-Axis digital readout counter fitted with 2-Axis X & Y scales for accurate table positioning with ease, 6-speeds 95-1650rpm, gear driven head which can be tilted up to 90º either side of the vertical. This feature allows the head to be positioned in a variety of positions, allowing a whole range of milling, slotting, grooving, drilling and boring operations to be carried out on different angles. In addition the milling head is also mounted to a vertical dovetail slide system that allows the head to maintain on the exact same centre position when raising or lowering. The usual handle-driven down feed is available for precision drilling and there is a fine manual down-feed control for precise vertical milling. The motor is controlled by a separate forward and reverse on/off button switches. There is a heavy duty steel stand available as an extra, strongly recommended bearing in mind the weight of the machine. Also available is an optional power feed attachment which fits to the left hand end of the table and provides a smooth, variable speed longitudinal drive. This is a Hare & Forbes special-order item, available to order through Alltools Geelong (order code M139D) for collection in store.
In the Box
- 3-Axis digital readout counter fitted with 2-Axis X & Y scales only
- Digital tilting head gauge
- Drill chuck & arbor
- Face cutter & arbor
- Interlocked spindle safety guard
- 3-2MT sleeve
- M12 drawbar
- 1/2″ x 12tpi Whitworth drawbar
- LED work light
Product Specifications
| Specification | Detail |
|---|---|
| Digital Readout | 3-Axis Counter, X, Y Scales |
| Type | Vertical |
| Table Size (mm) | 730 x 210 |
| Column Type | Dovetail |
| Spindle Taper – Vertical | 3MT |
| Longitudinal Travel (X-Axis) (mm) | 485* |
| Cross Travel (Y-Axis) (mm) | 175* |
| Vertical Travel (Z-Axis) (mm) | 430 |
| Type of Slides | Dovetail |
| Spindle to Table (mm) | 485 |
| Spindle Travel / Diameter (mm) | 120 / 75 |
| Throat Depth (max.) (mm) | 265 |
| Tilting Head (Left ~ Right) | ±90º |
| Tilting Head (Forward ~ Back) | Fixed |
| Drilling Capacity (mm) | 31.5 |
| End Milling Capacity (mm) | 28 |
| Face Milling Capacity (mm) | 80 |
| Power Feed – Longitudinal (X-Axis) (mm/min) | Optional |
| Table T-Slot Size (inch / mm) | 14 |
| Work Table Load Capacity (kg) | 55 |
| Spindle Speeds Vertical (No./ rpm) | 6 (95 – 1650) |
| Motor Power – Vertical Spindle (kW / hp) | 1.5 / 2 |
| Voltage / Amperage (V / amp) | 415 / |
| Nett Weight (kg) | 380 |
Reviews
There are no reviews yet.