Description
Kincrome
Kincrome Micrometer Torque Wrench — 1/4″ Drive, 2-24 Nm
Part No: MTW200I | Barcode: 9312753640237
Tighten fasteners to the manufacturer’s exact specification — this 1/4″ drive Kincrome micrometer torque wrench lets you preset a target torque on the micrometer sleeve, then delivers an audible click and release the moment that value is reached. Calibrated to ±4% and supplied with a certificate of calibration for confident, repeatable results.
1/4″ Square Drive
2-24 Nm
17.7-212.4 in/lb
±4% Accuracy
Reversible Ratchet
Audible Click
Calibration Certificate
Key Features & Benefits
- Micrometer-type sleeve — set an accurate preset torque level quickly and read it clearly off the dual-scale handle.
- Audible click and tension release — signals the instant target torque is reached, preventing over-tightening and fastener damage.
- Reversible ratchet head — works in both directions for fastening in confined spaces.
- ±4% accuracy, ISO 6789-1:2017 tested — manufactured and tested to international standard, with a supplied certificate of calibration.
- Nickel chrome plated alloy construction — durable and corrosion resistant for workshop and field use.
- 1/4″ square drive — matches the light, precise low-torque work this range targets.
When to Use This Torque Wrench
Use the MTW200I whenever a fastener calls for a specified torque value rather than “tight enough” — engine components, wheel nuts, suspension and any critical assembly. Its 2-24 Nm range and 1/4″ drive suit small, precise fasteners and electronics-style work. Choose the drive and range that brackets your target torque near the middle of the scale for best accuracy.
Pro Tip: After use, wind the wrench back down to its lowest setting (not zero) before storage — this relieves tension on the internal spring and helps the wrench hold its calibration over time.
Authorised Australian Dealer — This product is sourced directly from
Kincrome Australia
and is backed by Kincrome’s lifetime guarantee and local support.
Kincrome Australia
and is backed by Kincrome’s lifetime guarantee and local support.
Product Specifications
| Part No. | Drive | Range (Nm) | Range (Imperial) | Accuracy | Barcode |
|---|---|---|---|---|---|
| MTW200I ★ | 1/4″ | 2-24 Nm | 17.7-212.4 in/lb | ±4% | 9312753640237 |
| MTW80F | 3/8″ | 6.8-108.5 Nm | 5-80 ft/lb | ±4% | 9312753640220 |
| MTW150F | 1/2″ | 13.6-203.5 Nm | 10-150 ft/lb | ±4% | 9312753700054 |
★ You are viewing the highlighted variant. Other drives in this range are also available. Each wrench is supplied with a certificate of calibration.
Browse our full range of hand tools at Alltools Geelong.
Reviews
There are no reviews yet.