Description
Ryco
Ryco Air Coupler Socket — 3/8″ Hose Tail (09.0845)
Part No: 09.0845 | Barcode: 16929 | Profile: Ryco
The Ryco 09.0845 is a Ryco air coupler (the valved socket half of a quick-connect air line) with a 3/8″ Hose Tail back end, used to connect and disconnect air tools, hoses and blow guns in one hand on compressed-air systems. The socket carries the automatic shut-off valve, so air stops the instant a plug is pulled — no air loss and no whipping hose. Profile: Ryco.
Ryco
Coupler (Socket)
3/8″ Hose Tail
3/8″ Size
Auto Shut-Off Valve
One-Hand Connect
Suitable For
Compressed Air Lines
Air Tools & Nailers
Workshop Air Reticulation
Blow Guns & Tyre Inflators
Key Features & Benefits
- Ryco profile — Ryco is the long-established Australian airline coupling pattern, so this fitting interchanges with the Ryco-pattern plugs, couplers and adaptors already running in most Australian workshops — dropping straight into your existing air system.
- Automatic shut-off valve — air is cut off the moment a plug disconnects, stopping pressure loss and dangerous hose whip.
- One-hand quick connect — push a matching plug in to lock, pull the sleeve back to release, so tools swap over in seconds.
- 3/8″ hose tail — barbed tail clamps onto matching air hose for a secure, vibration-proof connection.
- Genuine air-line componentry — matched to the rest of the Ryco airline coupling range for reliable sealing under shop air pressure.
When to Use This Fitting
Reach for the Ryco 09.0845 when you need the valved socket half of a Ryco air connection — fit it to your fixed points (compressor outlet, wall reticulation, hose reels and FRL units) so any matching Ryco plug can be connected one-handed. Pair it with the matching Ryco-pattern plugs and adaptors in the range below; the 3/8″ Hose Tail back end lets you tie it into your existing thread or hose run.
Pro Tip: Air-coupler profiles are not interchangeable — Ryco, Cejn/Euro, Nitto and ARO patterns all look similar but will not seat together. Keep your whole shop on the one Ryco pattern so every plug mates with every socket; if you run mixed profiles, use a clearly labelled adaptor at the change-over point.
Authorised Australian Dealer — This is a genuine Ryco air-line fitting, backed by Australian supply and local support from Ryco Australia.
Product Specifications
| Part No. | Brand / System | Type | Connection |
|---|---|---|---|
| 08-SR20M4 | Ryco / Ryco SR | Adaptor | 1/4″ BSP Male |
| 08-SR20F4 | Ryco / Ryco SR | Adaptor | 1/4″ BSP Female |
| 08-SR20T6 | Ryco / Ryco SR | Adaptor | 3/8″ Hose Tail |
| 08-SR200F4 | Ryco / Ryco SR200 | Coupler (Socket) | 1/4″ BSP Female |
| 08-SR500F4 | Ryco / Ryco SR500 | Coupler (Socket) | 1/4″ BSP Female |
| 08-J310T6 | Ryco / Ryco 310 | Coupler (Socket) | 3/8″ Hose Tail |
| 08-J31M | Ryco / Ryco 310 | Adaptor | 1/4″ BSP Male |
| 09.0815 | Ryco / Ryco | Coupler (Socket) | 1/4″ BSP Male |
| 09.0845 ★ | Ryco / Ryco | Coupler (Socket) | 3/8″ Hose Tail |
| 13.0965 | Ryco / Ryco 310 | Coupler (Socket) | 1/4″ BSP |
| 13.0980 | Ryco / Ryco | Coupler (Socket) | 1/4″ BSP Male |
| 31-1111 | Ryco / Ryco 310 | Adaptor (Plug) | 1/4″ BSP |
★ You are viewing the highlighted item. Other Ryco-pattern couplers, plugs and adaptors are also available — mix and match within the same profile.
Browse our wide range of air fittings & piping at Alltools Geelong.
Reviews
There are no reviews yet.