Description
Makita DHP482Z — DHP482Z 18V LXT hammer drill skin available at Alltools Geelong. Shop our full DHP482Z 18V LXT hammer drill range in Geelong.
Makita
Makita 18V LXT Hammer Drill Driver — 62 Nm, 13mm Chuck — DHP482Z (Skin)
Part No: DHP482Z | Barcode: 88381699051
Makita DHP482Z is the workhorse 18V LXT combi drill — 62 Nm of torque, all-metal 13mm keyless chuck, hammer mode for masonry, and the 2-speed gearbox to handle everything from cabinet hinges to 38mm holesaws. Body only (skin) — pairs with any 18V LXT battery you already own.
62 Nm Max Torque
13 mm Metal Chuck
2-Speed Gearbox
21 + Drill + Hammer
0-600 / 0-2000 rpm
0-30,000 bpm Hammer
LED Job Light
Body Only — 18V LXT
Drilling Capacity
Steel — 13 mm
Wood — 38 mm
Masonry — 13 mm
Auger Bit — 36 mm
Self-Feed — 76 mm
Holesaw — 102 mm
Key Features & Benefits
- 62 Nm hard-mode torque — pulls 38mm spade bits through framing pine and drives 100mm batten screws without bogging down; the punchier sibling of the 42 Nm DHP453.
- All-metal 13mm keyless chuck — sleeve and ratchet ring are steel, not plastic — survives drop tests on site and grips round-shank bits without slip on full torque.
- 2-speed all-metal gearbox — 0-600 rpm low for high torque (driving lags, big holesaws), 0-2000 rpm high for fast drilling in steel and timber.
- 21 + drill + hammer mode dial — fine-tuned clutch settings for repeatable cabinetry and joinery work, plus a true hammer mode (0-30,000 bpm) for masonry anchors up to 13mm.
- Variable-speed trigger and F/R lever — feathering control for starting fasteners, plus a thumb-lock at the trigger to prevent accidental starts in the toolbag.
- Built-in LED job light with afterglow — illuminates the bit even in dark cabinet interiors and ceiling cavities; lingers a few seconds after release.
- Compatible with the entire Makita LXT range — runs any 18V LXT battery from 1.5 Ah compact through to 6.0 Ah and 8.0 Ah BL1860B / BL1880B for sustained heavy work.
When to Use This Tool
The DHP482Z is the right pick when you need real combi-drill performance from a brushed motor at trade-grade pricing — cabinetmakers, electricians, plumbers, builders and serious DIY users who already own LXT batteries. Step up to the brushless DHP484 or DHP486 only when the duty cycle justifies it. (Part No: DHP482Z)
Pro Tip — Battery pairing: for any job heavier than driving 75mm screws, run the DHP482Z on a 4.0 Ah BL1840B or larger. The 1.5 Ah and 2.0 Ah compact packs work fine for cabinetry but will sag under sustained 13mm steel drilling and trip the protection circuit before the day is out.
Authorised Australian Dealer — This product is sourced directly from Makita Australia and is backed by full Makita Australia 3-year tool warranty plus local service through the national service network.
Technical Specifications
| Spec | Value |
|---|---|
| Part Number | DHP482Z (body only / skin) |
| Battery Platform | Makita 18V LXT |
| Max Torque (Hard) | 62 Nm |
| Max Torque (Soft) | 32 Nm |
| Chuck Capacity | 1.5 – 13 mm Keyless, All Metal |
| No-Load Speed | 0-600 / 0-2000 rpm (2-speed) |
| Impacts per Minute | 0-9,000 / 0-30,000 bpm |
| Clutch Settings | 21 + Drill + Hammer |
| Drilling — Steel | 13 mm |
| Drilling — Wood | 38 mm |
| Drilling — Masonry | 13 mm |
| Overall Length | 209 mm |
| Weight (body only) | 1.4 kg |
| Weight (with BL1830B) | 1.7 kg |
Browse our full range of cordless drills at Alltools Geelong.
Reviews
There are no reviews yet.