Description
Goliath
Goliath Tap Extractor — 10mm
Part No: Tap | Barcode: 0043396159044 | Brand: Goliath
Goliath tap extractor for removing broken taps without drilling, sparking or damaging the existing thread. Hardened-steel fingers slide into the flutes of the broken tap so it can be backed out using a standard tap wrench. Goliath Threading Tools has been a familiar name in Australian threading for decades and joined the Bordo family in 2017. The range covers taps, dies, tap-and-die sets, die stocks, tap wrenches and accessories suited to both production and workshop use.
Removes Broken Taps
No Drilling Required
Hardened Steel Fingers
Standard Tap Wrench Drive
Key Features & Benefits
- Recovers broken taps without drilling — no need for spark erosion, lasers or thread inserts when the broken tap is sound enough to grip.
- Hardened steel fingers — fit the flutes of the broken tap and grip with enough strength to back it out under a standard tap wrench.
- Preserves the existing thread — because no material is removed from the workpiece, the original thread is undamaged.
- Square drive shank — turn with any standard tap wrench — slow, careful forward-and-back action loosens the broken piece.
When to Use This Tap Extractor
Reach for a tap extractor any time a tap shears off in the workpiece. Clear all chips from the broken tap (compressed air helps), insert the extractor fingers into the flutes, slide the sleeve down to the work, then turn with a tap wrench to walk the broken piece out. This particular variant (Tap) covers the 10mm specification.
Pro Tip: Tap extractors work best on cleanly-broken taps with the flutes intact. If the broken tap is shattered or seized hard, you may need to step up to spark erosion or a thread-insert repair — extractors are not magic, they need flute geometry to grip onto.
Authorised Goliath Dealer — This product is sourced through Goliath Threading Tools (distributed by Bordo Industrial) and is backed by full Australian manufacturer warranty and local support.
Browse our full range of taps & dies at Alltools Geelong.
Reviews
There are no reviews yet.