Intech Tools MTTBG — intech taper bore gauge 1 available at Alltools Geelong. Shop our full intech taper bore gauge 1 range in Geelong.
Intech Tools
Intech Taper Bore Gauge — 1–15mm (1/16–5/8″)
Part No: MTTBG | Barcode: 9333608007586 | Series: Intech Engineering Gauges
Intech’s MTTBG taper bore gauge is a tapered stainless-steel precision instrument for gauging small hole diameters from 1mm to 15mm (1/16″ to 5/8″). Engraved metric graduations on one side and imperial on the other let you drop the taper into a drilled or reamed hole and read the diameter directly where the gauge just seats.
1–15mm Range
1/16–5/8″ Imperial
Stainless Steel
Engraved Graduations
Dual Metric / Imperial
Compatible Work
Drilled Holes
Reamed Holes
Tapped Hole Minor Dia.
Small-Bore Inspection
Key Features & Benefits
- Tapered measurement principle — drop the gauge into the hole; where it seats, the reading at that depth is the hole diameter. No micrometer or caliper needed for quick go/no-go checks.
- Stainless-steel construction — resists corrosion from coolant, oils and workshop handling; the engraved scale stays legible under use.
- Engraved (not printed) graduations — lines are cut into the steel so solvents and oils won’t lift them; readable for the life of the tool.
- Dual metric/imperial scales — metric on one side (1–15mm), imperial on the other (1/16–5/8″), so you can work in whichever system matches the drawing without conversion.
- Compact form factor — slides into a tight workshop drawer or apron pocket for quick checks on the machine.
When to Use the MTTBG
Reach for the MTTBG when you need to verify a small drilled or reamed hole diameter quickly — a drilled pilot for tapping, a reamed dowel hole, or checking the minor diameter of a tapped thread. It covers 1–15mm in one compact tool and is faster than a caliper for go/no-go checks on machined parts. For larger holes, step up to a dial bore gauge or inside micrometer.
Pro Tip: The taper gauge reads the hole at the point it seats — if you push it harder, the reading is wrong. Let it drop under its own weight for consistent, repeatable measurements; don’t force it. This gives you true diameter, not an interference fit reading.
Authorised Australian Dealer — This product is backed by full Australian manufacturer warranty from Intech Tools, with local support and service through Alltools Geelong.
Browse our full range of engineering tools at Alltools Geelong.
Reviews
There are no reviews yet.