Description
Intech Tools
Intech Carbide-Tipped Dead Centre — MT2 Morse Taper
Part No: LCDC2 | Barcode: 9333608003267 | Brand: Intech Tools
The Intech LCDC2 is a fixed (dead) centre with a brazed carbide tip and a carbon steel body fully hardened to 60-63 HRC. The carbide point handles workpieces that are themselves hard or hardened — exactly where a plain steel dead centre would gall or burn — and the precision 60° angle matches standard centre-drilled holes.
MT2 Morse Taper
Carbide Tipped
60-63 HRC
Carbon Steel Body
60° Point
Key Features & Benefits
- Brazed carbide tip — sits in a precision-ground socket so it stays put under axial load and through coolant.
- Body hardened to 60-63 HRC — full through-hardness in the carbon steel body resists wear in the taper and on the shoulders.
- MT2 taper — fits standard MT2 tailstocks and headstock spindles directly.
- For hard and hardened workpieces — carbide carries the heat where steel-tipped centres would soften and gall.
- Precision 60° point — matches the geometry of any standard centre drill or NC spotting drill.
When to Use This Dead Centre
Use the LCDC2 as a fixed centre in the headstock or tailstock when you are turning hard or hardened material that would chew up a standard steel centre — bearing journals, tool steel shafts, hardened pins. Apply a dab of high-pressure grease to the centre hole so the work does not bind or burn at high spindle speed.
Product Specifications
| Part No. | Morse Taper | Barcode |
|---|---|---|
| LCDC1 | MT1 | — |
| LCDC2 ★ | MT2 | 9333608003267 |
| LCDC3 | MT3 | 9333603003274 |
| LCDC4 | MT4 | — |
| LCDC5 | MT5 | — |
★ You are viewing the highlighted variant. Other sizes in this series are also available.
Browse our full range of lathe centres at Alltools Geelong.
Reviews
There are no reviews yet.