Description
Harlingen
Harlingen MT3 High-Precision Live Centre — H-41-323-003
Part No: H-41-323-003 | Barcode: 9346967110637 | Brand: Harlingen
A precision Morse Taper 3 live centre with sealed bearings, 0.005mm runout, 5000 RPM rated speed and a 500kg maximum workpiece load. The right-sized tailstock support for hobby and trade lathes with MT3 tailstock sockets.
MT3 Taper
0.005mm Runout
5000 RPM Max
500 kg Load
Sealed Bearings
Hardened Steel
Compatible Materials
Hardened Tool Steel
Key Features & Benefits
- Morse Taper 3 (MT3) shank — Self-holding taper drops straight into common MT3 tailstocks on hobby and trade engine lathes.
- 0.005 mm runout accuracy — Concentric enough for finish-turning, threading and cylindrical grinding setups.
- Rated to 5000 RPM — Higher tailstock speed than the larger MT4 sibling — better for small-diameter shaft work.
- 500 kg maximum workpiece load — Sized correctly for typical workshop shafts on Asian-built and European hobby lathes.
- Sealed bearing pack — Excludes swarf and coolant, extending bearing life without periodic re-greasing.
When to Use This Tool
H-41-323-003 is the right call when your lathe has an MT3 tailstock — common on Sieg SC4, Hafco AL series, Optimum and similar 250–300mm swing engine lathes. Use it any time the workpiece is too long to overhang the chuck on its own.
Authorised Australian Distributor — This product is sourced via Australia’s Harlingen distributor Gamer Industries and is backed by full Australian warranty and local support.
Product Specifications
| Part No. | Taper | Max RPM | Max Load | Runout |
|---|---|---|---|---|
| H-41-323-002 | MT2 | — | — | 0.005 mm |
| H-41-323-003 ★ | MT3 | 5000 RPM | 500 kg | 0.005 mm |
| H-41-323-004 | MT4 | 3800 RPM | 800 kg | 0.005 mm |
| H-41-323-005 | MT5 | — | — | 0.005 mm |
| H-41-323-006 | MT6 | — | — | 0.005 mm |
★ You are viewing the highlighted variant. Other sizes in this series are also available.
Browse our full range of lathe centres at Alltools Geelong.
Reviews
There are no reviews yet.