Accud
Accud Dial Caliper — 0–200mm (0–8″)
Part No: AC-101-008-11 | Barcode: 9346967024583 | Series: Accud 101 Dial Calipers
The Accud AC-101-008-11 is a precision dial caliper reading to 0.02mm across the 0–200mm range. Shock-protected dial movement, stainless-steel beam and continuous dial — the battery-free analog caliper for workshops that don’t want the failure risk of a digital display.
0–200mm / 0–8″
0.02mm Graduation
Shock-Protected Dial
Stainless Steel
No Battery
Locking Screw
Compatible Work
Apprentice Training
General Engineering
Fabrication
Machining
Critical Inspection
Key Features & Benefits
- 0.02mm dial graduation — precise reading on a large-face rotating dial; significantly faster to read than a vernier scale once familiarity is built.
- Shock-protected movement — hardened gearing and sealed internals handle bench drops and shop handling better than jewelled alternatives.
- Rotating bezel — zero the dial at any jaw position for comparative measurement against a reference part.
- Stainless-steel construction — beam and jaws resist coolant corrosion; dial crystal is acrylic for shatter resistance.
- Battery-free operation — no electronic failure mode; a dial caliper reads the same after twenty years in a drawer as the day it was put away.
- Locking screw — lock the slider at a dimension for transfer to another caliper, a micrometer or a scribing layout.
When to Use the AC-101-008-11
Reach for the AC-101 dial caliper when you want precision without battery dependence — apprentice training (reading a dial builds the mechanical-instinct skill digital hides), critical measurement where a dead battery can’t halt work, or heavy workshop use where digital electronics routinely fail. For fastest reading on production work the AC-111 digital is quicker; for mechanical-vernier precision without a dial see the AC-120 series.
Pro Tip: Close the jaws on a known gauge block or a certified standard before critical readings — the dial’s zero is a mechanical position, not a digital reset, and a bumped bezel silently carries a 0.01mm offset into every subsequent reading. The gauge-block check catches this before the error costs a scrapped part.
{stbl(digital_caliper_full, “AC-101-008-11”, “Accud Digital & Vernier Calipers — Full Range”, [“Part No.”, “Type”, “Range”, “Resolution”, “Accuracy”, “Barcode”])}
Reviews
There are no reviews yet.