Description
Accud AC-101-006-11 — dial caliper 0 available at Alltools Geelong. Shop our full dial caliper 0 range in Geelong.
Accud
Accud Dial Caliper — 0–150mm (0–6″)
Part No: AC-101-006-11 | Barcode: 9346967024576 | Series: Accud 101 Dial Calipers
The Accud AC-101-006-11 is a 0–150mm dial caliper reading to 0.02mm with shock-protected movement. Stainless-steel construction, rotating bezel and continuous dial face — the battery-free analog caliper that stays accurate session after session without electronic failure risk.
0–150mm / 0–6″
0.02mm Graduation
Shock-Protected Dial
Stainless Steel
No Battery
Locking Screw
Compatible Work
Apprentice Training
General Engineering
Fabrication
Machining
Critical Inspection
Key Features & Benefits
- 0.02mm dial graduation — precise reading on a large-face rotating dial; faster to read than a vernier once familiarity is built.
- Shock-protected movement — hardened gearing and sealed internals handle bench drops better than jewelled alternatives.
- Rotating bezel — zero the dial at any jaw position for comparative measurement against a reference gauge block or part.
- Stainless-steel beam & jaws — resist coolant corrosion; dial crystal is acrylic for shatter resistance.
- Battery-free operation — no electronic failure mode; reads the same after twenty years as the day it was purchased.
- Locking screw — lock the slider at a dimension for transfer to another tool or scribing layout.
When to Use the AC-101-006-11
Reach for the AC-101 150mm dial caliper when you want precision without battery dependence — apprentice training, critical measurement where a dead battery can’t halt work, or heavy workshop use where electronics routinely fail. The 150mm size is the everyday bench caliper; the 200mm AC-101-008-11 variant gives more reach. For fastest reading on production work, step up to the AC-111 digital; for vernier-scale precision see the AC-120 series.
Pro Tip: Close the jaws on a gauge block or known standard before critical readings — the dial’s zero is mechanical, not a digital reset, and a bumped bezel silently carries a 0.01mm offset into every measurement. The gauge-block check catches this before it costs a scrapped part.
Product Specifications
| Part No. | Range | Graduation | Accuracy | Barcode |
|---|---|---|---|---|
| AC-101-006-11 ★ | 0-150mm | 0.02mm | ±0.03mm | 9346967024576 |
| AC-101-008-11 | 0-200mm | 0.02mm | ±0.03mm | 9346967024583 |
★ You are viewing the highlighted variant.
Reviews
There are no reviews yet.