Description
HAFCO-METALMASTER
Centre Lathe — AL-336, Ø300 x 900mm Turning Capacity – Ø38mm Spindle Bore 18 Geared Head Speeds 65 ~ 1810rpm, Includes Light, Foot Brake, Coolant System & Cabinet Stand
Part No: L682 | Barcode: 9344195026454 | Model: AL-336
HAFCO-METALMASTER AL-336 Centre Lathe (Ø300 x 900mm Turning Capacity – Ø38mm Spindle Bore 18 Geared Head Speeds 65 ~ 1810rpm, Includes Light, Foot Brake, Coolant System & Cabinet Stand). The AL-336 high quality centre lathe with a turning capacity of Ø300 x 900mm is well known in the industry for its metal turning…
Model AL-336
Swing Over Bed: 300 mm
Spindle Bore: 38 mm
Swing In Gap: 450 mm
Swing Over Cross-slide: 180 mm
Spindle Nose Size or Type: D1-4 Camlock
Headstock Spindle Taper: 5 MT
Key Features & Benefits
- Gear drive headstock for quick change of spindle speeds
- Precision ‘V’-beds are hardened and ground, incorporating a rigid webbed casting
- Slide out swarf tray from front of machine
- Low voltage work light
- Foot operated spindle brake with safety cut out switch
- Change gears for metric and imperial thread cutting
- Oil sight glass for head stock and gearbox
- Adjustable taper roller bearings support the spindle
- 18 spindle speeds from 65 to 1810rpm
- Inching button is incorporated on the control panel for convenient spindle speed selection
- Enclosed quick action gearbox for thread cutting and auto feeding
- Powered longitudinal and cross feeds
- D1-4 camlock spindle for quick chuck changes and safe reverse direction turning. ISO standard
- Removable gap bed-way for larger diameter jobs
- Dual calibrated dials (except for saddle hand-wheel)
- Chuck & change gear guards are fitted with micro switches
About This Product
The AL-336 high quality centre lathe with a turning capacity of Ø300 x 900mm is well known in the industry for its metal turning capabilities & is suitable for the model engineer or general maintenance workshops. Featuring an induction hardened vee bedways are precision ground that allows the saddle to smoothly slide over it, full gear driven spindle speeds ranging from 65 – 1810rpm are selectable via the gear selector levers that are accessible from the front of headstock for your convenience & certainly makes this lathe package well sort after. The 2hp single phase 240V motor is ample power to drive the 3 & 4 jaw chucks, auto feed & screw cutting thread system and the adjustable taper roller spindle bearings ensures accuracy & smooth operation even when under cutting load. A great range of cross, longitudinal feed speeds & metric & imperial screw cutting threads are easy accessible & selected via the separate gearbox located underneath the headstock for your convenience. Supplied with a large range of standard accessories including a 150mm 3 jaw self centring chuck, 200mm 4 jaw independent chuck with D1-4 camlock for quick change over, face plate, spindle safety foot brake, chuck guard with safety interlock switch, thread chasing dial, rear splash guard, coolant pump system, work light, fixed & traveling steadies & that rounds up most of the great features on this fantastic centre lathe. The floor stand is equipped with a slide out swarf tray that makes it very easy to clean down and remove your waste material swarf. This is a Hare & Forbes special-order item, available to order through Alltools Geelong (order code L682) for collection in store.
In the Box
- 3-jaw chuck with reverse jaws
- 4-jaw chuck
- Face plate
- Fixed steady
- Travelling steady
- Coolant system
- Change gears
- Dead centres
- Thread-chasing dial
- Safety chuck guard
- Work light
- Stand
- Foot brake
- Rear splash guard & slide out swarf tray
- Tool box
- Instruction booklet
Product Specifications
| Specification | Detail |
|---|---|
| Swing Over Bed (mm) | 300 |
| Distance Between Centres (mm) | 900 |
| Spindle Bore (mm) | 38 |
| Swing In Gap (mm) | 450 |
| Swing Over Cross-slide (mm) | 180 |
| Digital Readout System Fitted | Optional |
| Quick Change Toolpost Fitted | Optional |
| Coolant System | Yes |
| Tool Height To Suit (mm) | 12 |
| Centre Height (mm) | 150 |
| Spindle Nose Size or Type | D1-4 Camlock |
| Bed Width (mm) | 180 |
| Headstock Spindle Taper (MT) | 5 |
| Tailstock Taper (MT) | 3 |
| Cross Slide Travel (mm) | 170 |
| Compound Slide Travel (mm) | 75 |
| Leadscrew Type | Imperial |
| Imperial Cross Feed (X-Axis) (inch/rev) | 0.009 – 0.236 |
| Imperial Longitudinal Feed (Z-Axis) (inch/rev) | 0.04 – 1.22 |
| Metric Thread Steps & Pitch (No. / mm) | 32 (0.4 – 7) |
| Imperial Thread Steps & TPI (No. / TPI) | 36 (4 – 60) |
| 3 Jaw Chuck Diameter (mm) | 160 |
| 4 Jaw Chuck Diameter (mm) | 200 |
| Spindle Steps / Speeds (No. / rpm) | 18 (65 – 1810) |
| Motor Power (kW / hp) | 1.5 / 2 |
| Voltage / Amperage (V / amp) | 240 / 10 |
| Nett Weight (kg) | 595 |
Reviews
There are no reviews yet.