Accud AC-111-012-12 — ip54 digital caliper 0 0 available at Alltools Geelong. Shop our full ip54 digital caliper 0 0 range in Geelong.
Accud
Accud IP54 Digital Caliper — 0–0-300mm Dual-Scale
Part No: AC-111-012-12 | Barcode: 9346967024651 | Series: Accud 111 IP54 Digital Calipers
The Accud AC-111-012-12 is an IP54 coolant-splash-resistant digital caliper with dual metric and imperial readings across 0–0-300mm. Stainless-steel construction, 0.01mm resolution and the everyday workshop digital caliper that holds up to shop handling far better than the entry-level plastic-bodied range.
0–0-300mm
0.01mm Resolution
IP54 Rated
Stainless Steel
Dual Metric And Imperial
Zero & Hold
Compatible Work
General Engineering
Machining Inspection
QC Gauging
Fabrication
Automotive Workshop
Key Features & Benefits
- IP54 protection — sealed against dust and coolant splash; safe for shop-floor use next to the lathe or mill where the lightly-sealed display of entry-level calipers would fail.
- Stainless-steel beam & jaws — resist coolant corrosion and bench handling; hold dimensional stability across shop temperature swings.
- Dual Metric And Imperial display — switch metric/imperial at the press of a button; handles legacy inch drawings alongside modern metric work.
- Four-way measurement — outside, inside, depth and step measurements from a single caliper; covers nearly every bench dimensioning task.
- Zero-at-any-position — set the display to zero at any jaw opening for comparative measurement against a reference gauge block or part.
- 0.01mm resolution with ±0.03mm accuracy — workshop-standard precision with the confidence of a certified accuracy spec.
When to Use the AC-111-012-12
Reach for the AC-111-012-12 0-300mm IP54 digital caliper as your bench workhorse — general machining inspection, fabrication dimensioning, bench QC checks. The 300mm size handles bigger fabrication and plate work. For wet environments step up to the AC-112 IP67 series; for 0.001mm resolution the AC-313 IP65 digital mic covers 0-25mm.
Pro Tip: Close the jaws and press zero before each measurement session — digital calipers drift less than mechanical ones but a bumped slider can carry a small offset that only shows up when you check against a gauge block. The 3-second zero check catches this before it costs you a scrapped part.
Product Specifications
| Part No. | Type | Range | Resolution | Accuracy | Barcode |
|---|---|---|---|---|---|
| AC-111-006-11 | IP54 Metric | 0-150mm | 0.01mm | ±0.03mm | 9346967024606 |
| AC-111-006-12 | IP54 Dual-Scale | 0-150mm | 0.01mm/0.0005″ | ±0.03mm | 9346967024613 |
| AC-111-008-11 | IP54 Metric | 0-200mm | 0.01mm | ±0.03mm | 9346967024620 |
| AC-111-008-12 | IP54 Dual-Scale | 0-200mm | 0.01mm/0.0005″ | ±0.04mm | 9346967024637 |
| AC-111-012-11 | IP54 Metric | 0-300mm | 0.01mm | ±0.04mm | 9346967024644 |
| AC-111-012-12 ★ | IP54 Dual-Scale | 0-300mm | 0.01mm/0.0005″ | ±0.04mm | 9346967024651 |
| AC-112-006-12 | IP67 Dual-Scale | 0-150mm | 0.01mm/0.0005″ | ±0.03mm | 9346967024668 |
| AC-112-008-12 | IP67 Dual-Scale | 0-200mm | 0.01mm/0.0005″ | ±0.03mm | 9346967024675 |
| AC-117-006-11 | Plastic Non-Marking | 0-150mm | 0.01mm | ±0.1mm | 9346967024699 |
| AC-120-006-12 | Vernier DIN862 | 0-150mm | 0.02mm/0.001″ | ±0.03mm | 9346967024729 |
| AC-120-008-12 | Vernier DIN862 | 0-200mm | 0.02mm/0.001″ | ±0.04mm | 9346967024736 |
★ You are viewing the highlighted variant. Other sizes in this series are also available.
Browse our full range of engineering tools at Alltools Geelong.
Reviews
There are no reviews yet.