Description
Master Q
Master Q Air Safety Relief Valve — 1/4" BSP (SV14-10)
Part No: SV14-10 | Barcode: 16894 | System: PE100 SDR11
Master Q SV14-10 is a 1/4″ BSP air safety relief valve used to protect compressed-air equipment and receivers from over-pressure by venting automatically once a preset pressure is reached. It screws into a 1/4″ BSP port on a tank, manifold or air line and re-seats once pressure returns below the set point.
1/4" BSP
Over-Pressure Protection
Auto-Venting
Re-Seating
Compressed-Air Receivers
Suitable For
Air Receivers & Tanks
Manifolds & Air Lines
Compressor Protection
Pressure-System Safety
Key Features & Benefits
- Automatic over-pressure relief — vents air once the preset pressure is exceeded, protecting the system from dangerous over-pressure.
- 1/4" BSP thread — screws straight into a 1/4" BSP port on a receiver, manifold or air line.
- Re-seats automatically — closes again once pressure drops back below the set point.
- Safety-critical fitting — a required safeguard wherever compressed air is stored or distributed.
When to Use This Fitting
Fit the SV14-10 safety relief valve to any compressed-air receiver, manifold or section that needs over-pressure protection on a 1/4" BSP port. It is a safety device — size and set it to suit the equipment it protects. See the full Master Q range below.
Authorised Australian Supplier — This product is supplied through Master Q Australia with full local supplier support and warranty.
Master Q Compressed-Air Poly Piping System
| Part No. | Type | Size / Connection |
|---|---|---|
| 025PE100/10 | Poly Pipe (PE100 SDR11) | 25mm × 6m length |
| R210.025.025 | Straight Coupler | 25mm — 25mm |
| R213.025.025 | 90° Elbow | 25mm — 25mm |
| 727156307 | 45° Elbow | 25mm — 25mm |
| R214.025.000 | Equal Tee | 25mm — 25mm |
| 727206308 | Equal Tee | 32mm — 32mm |
| R221.025.000 | End Cap | 25mm |
| EP3 | End Cap | 32mm |
| C3 | Straight Coupler | 32mm — 32mm |
| M31-2520 | Female Threaded Connector | 25mm — 3/4″ BSP F |
| 727116307 | Female Threaded Elbow | 25mm — 3/4″ BSP F |
| R215.025.012 | Threaded Tee | 25mm — 1/2″ BSP F |
| 158001920 | Wall Plate | 25mm — 3/4″ BSP F |
| PC25 | Pipe Clip | 25mm |
| PCC32 | Pipe Clip | 32mm |
| SV14-10 ★ | Safety Relief Valve | 1/4″ BSP |
★ You are viewing the highlighted item. The Master Q poly piping range push-fits together — mix pipe, couplers, elbows, tees, threaded take-offs and clips to build your compressed-air reticulation.
Browse our wide range of air fittings & piping at Alltools Geelong.
Reviews
There are no reviews yet.