Description
Master Q
Master Q 90° Elbow — 25mm Push-Fit (R213.025.025)
Part No: R213.025.025 | Barcode: 21686 | System: PE100 SDR11
Master Q R213.025.025 is a 25mm push-fit 90° elbow used to turn a 25mm compressed-air poly line around corners and down wall drops. Push both pipe ends in and hand-tighten the compression nuts for a sealed right-angle change of direction in the Master Q poly piping system.
25mm — 25mm
90° Change of Direction
Push-Fit Compression
Hand-Tightened
Demountable
Suitable For
Corners & Wall Drops
Routing Around Obstacles
Workshop Reticulation
Down-Pipe Take-Offs
Key Features & Benefits
- 90° angle — turns the air line cleanly around corners and down from ceiling mains to working height.
- Push-fit compression ends — seal onto 25mm pipe with O-ring and collet — no tools beyond a spanner to nip the nut.
- Smooth bore — rounded internal path keeps pressure-drop low compared with threaded steel elbows.
- Demountable — re-positionable if the layout changes — loosen, move, re-seal.
When to Use This Fitting
Use the R213.025.025 elbow wherever a 25mm air line needs to turn a right angle — around a corner, up a wall, or down to a drop point. Combine with couplers and tees from the table below to route the run exactly where you need it.
Authorised Australian Supplier — This product is part of the Master Q compressed-air piping system, sourced from Master Q Australia with full local supplier support and warranty.
Master Q Compressed-Air Poly Piping System
| Part No. | Type | Size / Connection |
|---|---|---|
| 025PE100/10 | Poly Pipe (PE100 SDR11) | 25mm × 6m length |
| R210.025.025 | Straight Coupler | 25mm — 25mm |
| R213.025.025 ★ | 90° Elbow | 25mm — 25mm |
| 727156307 | 45° Elbow | 25mm — 25mm |
| R214.025.000 | Equal Tee | 25mm — 25mm |
| 727206308 | Equal Tee | 32mm — 32mm |
| R221.025.000 | End Cap | 25mm |
| EP3 | End Cap | 32mm |
| C3 | Straight Coupler | 32mm — 32mm |
| M31-2520 | Female Threaded Connector | 25mm — 3/4″ BSP F |
| 727116307 | Female Threaded Elbow | 25mm — 3/4″ BSP F |
| R215.025.012 | Threaded Tee | 25mm — 1/2″ BSP F |
| 158001920 | Wall Plate | 25mm — 3/4″ BSP F |
| PC25 | Pipe Clip | 25mm |
| PCC32 | Pipe Clip | 32mm |
| SV14-10 | Safety Relief Valve | 1/4″ BSP |
★ You are viewing the highlighted item. The Master Q poly piping range push-fits together — mix pipe, couplers, elbows, tees, threaded take-offs and clips to build your compressed-air reticulation.
Browse our wide range of air fittings & piping at Alltools Geelong.
Reviews
There are no reviews yet.