Description
Master Q
Master Q Compressed Air Poly Pipe — PE100 SDR11 25mm × 6m (025PE100/10)
Part No: 025PE100/10 | Barcode: 21682 | System: PE100 SDR11
Master Q 025PE100/10 is a 25mm PE100 SDR11 polyethylene pipe used to plumb permanent compressed-air reticulation lines through workshops, factories and trade premises. Supplied in a 6 metre straight length, it forms the backbone of the Master Q push-fit compression piping system and connects with the matching compression couplers, elbows, tees and threaded take-offs.
PE100 SDR11
25mm Outside Diameter
6m Straight Length
Push-Fit Compression System
~12.5 bar Rated
Corrosion-Free Polyethylene
Suitable For
Workshop Air Reticulation
Factory Compressed-Air Mains
Trade & Industrial Air Lines
Permanent Drop Points
Key Features & Benefits
- PE100 SDR11 polyethylene — a tough, smooth-bore pipe that will not rust, scale or corrode like steel air mains, keeping air clean and flow losses low.
- 25mm outside diameter — sized for the 25mm Master Q compression fittings, suiting small-to-medium workshop reticulation runs.
- 6 metre straight lengths — fast to install along walls and ceilings with the matching pipe clips for neat, supported runs.
- Push-fit compression system — cuts, inserts and tightens with hand tools — no welding, threading or solvent welding required, so the line can be modified or extended any time.
When to Use This Fitting
Use 25mm 025PE100/10 poly pipe to run the main air loop and drops in a workshop or factory air system. Cut to length, deburr, and join with the Master Q compression couplers, elbows and tees in the table below; add threaded connectors or wall plates wherever you need a regulator, filter or tool outlet. Support the run every metre or so with the matching pipe clips.
Authorised Australian Supplier — This product is part of the Master Q compressed-air piping system, sourced from Master Q Australia with full local supplier support and warranty.
Master Q Compressed-Air Poly Piping System
| Part No. | Type | Size / Connection |
|---|---|---|
| 025PE100/10 ★ | Poly Pipe (PE100 SDR11) | 25mm × 6m length |
| R210.025.025 | Straight Coupler | 25mm — 25mm |
| R213.025.025 | 90° Elbow | 25mm — 25mm |
| 727156307 | 45° Elbow | 25mm — 25mm |
| R214.025.000 | Equal Tee | 25mm — 25mm |
| 727206308 | Equal Tee | 32mm — 32mm |
| R221.025.000 | End Cap | 25mm |
| EP3 | End Cap | 32mm |
| C3 | Straight Coupler | 32mm — 32mm |
| M31-2520 | Female Threaded Connector | 25mm — 3/4″ BSP F |
| 727116307 | Female Threaded Elbow | 25mm — 3/4″ BSP F |
| R215.025.012 | Threaded Tee | 25mm — 1/2″ BSP F |
| 158001920 | Wall Plate | 25mm — 3/4″ BSP F |
| PC25 | Pipe Clip | 25mm |
| PCC32 | Pipe Clip | 32mm |
| SV14-10 | Safety Relief Valve | 1/4″ BSP |
★ You are viewing the highlighted item. The Master Q poly piping range push-fits together — mix pipe, couplers, elbows, tees, threaded take-offs and clips to build your compressed-air reticulation.
Browse our wide range of air fittings & piping at Alltools Geelong.
Reviews
There are no reviews yet.